Top » Catalog » Kavan » KAV201013MG

22.00EUR

Servo GO-1013 MG 3.8kg
[KAV201013MG]

High torque programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:14-1:24 RC cars, 400-450 size helis etc. Torque 3.0kg.cm, speed 0.15s/60° at 4.8V, torque 3.8kg.cm, speed 0.12s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load.

High Torque programmable digital pico servo with titanium gear and double BB-ed output shaft for small RC model planes, 1:14-1:24 RC cars, 400-450 size helicopters etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-1013MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Standard input voltage range 4.8-6.0 V (nominal).
25T/4.94 mm output shaft.
Servo dimensions Micro
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg/cm] 3
Thrust at 6.0V [kg/cm] 3.8
Speed at 4.8V [s/60st.] 0.15
Speed at 6.0V [s/60st.] 0.12
Servo gears Titanium
Ball bearings 2×
High-voltage No
Power supply [V] 4.8 - 6
Length [mm] 22.8
Width [mm] 12
Height [mm] 29.4
Weight [g] 15
Intended for Aeroplanes,Helicopters,On-road cars,Off-road cars,Boats

enought units

Reviews

Quick Find

Shopping Cart

1 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
1 x	Xplorer3 anemometro
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
3 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Threaded coupler M3 (10 uds)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
3 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Angled clevis with threaded rod M3
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
3 x	Glases Stratus
3 x	Glases Aspen
5 x	Glases Ace
3 x	Glases Nimbus
1 x	Xplorer2 anemometro
1 x	Oratex Yellow Cub 10 m
1 x	Oracover Verde 2 m
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	CC 03
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Extra-long adjustable aluminium control horn 2,8x34
3 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
2 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	Pulley brass 16/2 (2 pcs)
1 x	Glases Innovation Plus
1 x	Glases Moritz
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Flitemaster
2 x	X-RAY Micro QR (Rudder)
1 x	Glider PIROL
1 x	Fuselage Bags JEEMO
1 x	X-RAY Micro QR (Fuselage with canopy)
2 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	X-RAY Micro QR
1 x	X-RAY Micro QR (Tail Tube)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	X-RAY Micro QR (Elevator)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	TAKEO 3.6m electric
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
2 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	Servo KST X08 Plus 9g HV servo
1 x	Anchor 80 mm (2 uds)
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
2 x	50x45 mm micro-mini servo cover
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
2 x	Fueraborda RETRO
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
2 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo TOPMODEL DS9010 T
2 x	90x60 mm standart servo cover
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
2 x	Motor ACTRO 28-3-1300
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Coupling bush 5 - 5 mm
1 x	Rudder 2_Tray 4~4.5 inch
1 x	5 mm Prop Adapter M8
2 x	6 mm Prop Adapter M8
3 x	4 mm Prop Adapter M6
1 x	2 mm Prop Adapter M5
1 x	Lock washer 2.2 mm (20 pcs)
2 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
1 x	Floating M3 washer pad (36 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Servo FUTABA BLS173 SV
1 x	Aqua RACE 70 (without motor)
1 x	Servo TOPMODEL S7520 MG
1 x	Fishing boat Jule Fischkutter
1 x	Servo FUTABA S 9670 SV
1 x	La Capitania di Venetia accesories
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Programador FUTABA USB CIU-3
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	FUTABA 20 mm servo arm with ball link
1 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	HITEC 20 mm servo arm with ball link
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
2 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Futaba 38 mm servo arm
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Hitec 52 mm servo arm
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Motor RACE 720 Navy 12v
1 x	Kit wheel loader 966G II without electrics, without hydrauli
1 x	Mounting base Ms 8 mm
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	17 mm servo arm with ball link DES Graupner
1 x	Joint for loading boom 2 pairs, 10 x 5 mm
1 x	Futaba BLS152 - Upper Case
1 x	Servo TOPMODEL STANDARD S3217
1 x	Regulador Actro-Marine 80A
1 x	65 mm mini servo cover
1 x	Hinge 4x14 mm (20 pcs)
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	Glow starter with charger 230v
1 x	Metal ball clevis M3 (10 uds)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Lock nut M2.5 (10 pcs)
1 x	Metal clevis M3 (10 uds)
2 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Pulley brass 12/2 (2 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
2 x	Lock nut aluminium M2.5 (4 pcs)
2 x	Pulley brass 14/2 (2 pcs)
2 x	Porta Kwik link M4 3 mm (2 pcs)
2 x	Glases Nimbus "Black"
1 x	Engine mounts for .09 - .19 engine
1 x	Charger SKY RC e680
2 x	BETA 1400 ARF Red
1 x	KAVAN Hand crank fuel pump
1 x	BETA 1400 RTF Red
1 x	Ciano KAVAN Super Thin 20g
1 x	Kavan Car 25% nitro 1l
1 x	10 mm aluminium spinner (Kavan)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	SKY RC T400Q Charger 4x100w
1 x	KAVAN CA Activator 150ml
1 x	Ciano KAVAN Medium 20g
1 x	Conector MR-60 (pareja)
1 x	Ball Bearing Oil 25 ml
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
2 x	Fuel bottle 500 ccm
2 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Spinner 40 mm Black (Kavan)
1 x	Ciano KAVAN Thin 20g
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Adaptadores carga 6s JST-XH
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Pin hinge 39x20 mm (10 uds)
2 x	Pin hinge 34x16 mm (10 uds)
1 x	Glow Plug Clip 1.3 Ah
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Metal clevis M2 (10 uds)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Small kwik link (10 pcs)
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Kwik link with arm M3xM2xL24
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Micro clevis (10 uds)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Black large kwik link (10 pcs)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Micro clevis (10 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
1 x	Pulley brass 10/2 (2 pcs)
1 x	White large kwik link (10 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	THERMIK XL 4000 mm
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	Q-12 X-light 2000 mm Electric
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Axle for motor A30-XL V2
1 x	Servo FUTABA BLS175 SV
2 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	3 mm Long Prop Adapter M5
1 x	DPSI Ampere & Voltage bundle
1 x	DPSI RV Mini 5 Magic
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	Fuel Dot (Black)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Lancha neumatica 95 mm
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Electronic fog horn
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	LENTUS Multiplex Fundas alas
1 x	Chili F3K 2 wing servo mounted
2 x	Gracia Maxi ARF (Top Model)
1 x	Gracia (Top Model)
1 x	Cable adapter iCharger
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	EWC3 40 cm wing connector
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI magnetic switch actuator (PCB)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Lock nut M5 (10 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Thruster propeller 30/33 mm with motor 400 7,2V
1 x	Aeronaut Baumbeschlag (Ms) 10 mm
1 x	Motor ACTRO 35-4-790
1 x	Rudder tandem for two Futaba servos
1 x	18 mm wing servo holder
1 x	Hitec 20 mm servo arm
1 x	10 mm portholes (10 pcs)
1 x	11 mm wing servo holder
1 x	Futaba 20 mm servo arm
1 x	29,0 mm propeller (left propeller)
1 x	Servo BMS-4112
1 x	Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	Motor ACTRO 35-4-1100
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Superlight deluxe wheel 40 mm (2 pcs)
1 x	Threaded coupler M2,5 (10 pcs)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Threaded coupler M2 (10 pcs)
1 x	Round Rod 1.0x3.5 cm
2 x	Birch plywood plate 600x300x1.2 mm
1 x	Motor KAVAN PRO 2225-1600
1 x	Extension 15 cm (Futaba)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Cable coupler M2 (10 uds)
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Lock nut M6 (10 pcs)
1 x	ESC KAVAN R-80SB SBEC 80A
1 x	Servo GO-1013 MG 3.8kg
1 x	Extension 30 cm (Futaba)
1 x	Microbalon filler for CA glues. Packaging bottle 20g
1 x	Superlight deluxe wheel 45 mm (2 pcs)
1 x	Superlight standard wheel 100 mm (2 pcs)
1 x	Helice FOXY 22x10 2-Bl
1 x	Debonder CA 20g
1 x	Superlight deluxe wheel 75 mm (2 pcs)
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Birch plywood plate 600x300x2.5 mm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Blade holder metal LAMA
1 x	Extension 90 cm (Futaba)

19,128.06EUR