120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Prolongador Futaba macho 40 cm de silicona
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Prolongador silicona 10 cm (Futaba)
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Prolongador silicona 75 cm (Futaba)
1 x	Prolongador silicona 50 cm (Futaba)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Prolongador silicona 10 cm (Graupner)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Prolongador silicona 50 cm (Graupner)
1 x	Prolongador silicona 25 cm (Futaba)
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Prolongador silicona 35 cm (Futaba)
1 x	Prolongador silicona 100 cm (Graupner)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Prolongador silicona 100 cm (Futaba)
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
2 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Listón de PINO 10x10x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de PINO 5,0x5,0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Listón OBECHI 2,0x3,0x1000 mm
2 x	Listón de CAOBA 3,0x3,0x1000 mm
3 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Listón de HAYA redondo 2,0 x 1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Listón de TILO 3,0x3,0x1000 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Listón de TILO 2,0x2,0x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
2 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Listón de NOGAL 2,0x2,0x1000 mm
1 x	Listón de PINO 3,0x7,0x1000 mm
1 x	Instrumentos individuales 1/4 Planeador
1 x	Circlick seguridad
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Extension silicona 35 cm macho (Futaba)
1 x	Tubo Pitot para PIXHAWK
1 x	Cartucho de humo Amarillo 65 g
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Piloto civil "Curt" tamaño 9cm (Slimline)
1 x	Prolongador silicona 25 cm (Graupner)
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Rótula con bola M2,5 (10 pcs)
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Varilla carbono 1.0 mm x 1000 mm
1 x	Plancha de balsa 2,0x100x1000 mm
2 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Adaptador 3 LiPos XH>EH
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Cable silicona "Y" 30 cm (Futaba)
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x	Cable servos silicona 0,50 mm2 Futaba (100 m)
1 x	Cable carga emisora GRAUPNER
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	Adaptador 2 LiPos XH>EH
1 x	Cable Cargador FUTABA
1 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Soporte aluminio para encendido (azul)
1 x	Autoarranque DLE55, EME55/60, DLA56, SE 55
1 x	Hélice POWER-PROP 7x7
1 x	Luces Power MULTIlight
1 x	Prolongador motor XXL Blazing 60-83 mm
1 x	Rueda KOVO C SLH 110x55 mm
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Rueda Jets 115x29 (4.50") centro aluminio
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Piloto 1/12 "Langley"
1 x	Piloto 1/7 "Japonés"
1 x	Piloto 1/10 "Jimmy"
1 x	Rueda KOVO C SLH 120x60 mm
1 x	Piloto 1/10 "Jack"
1 x	Sistema de arranque a bordo (9715)
1 x	Encendido GLOW 2C + accesorios
1 x	Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x	Piloto 1/4 "Heidi"
1 x	Escape O-ring Saito FG-73 5cyl
1 x	Piloto 1/12 "Cougar"
1 x	Piloto 1/12 "Tom"
1 x	Depósito "Taxi Tank"
1 x	Tren carbono de 160 mm (2pcs)
1 x	Piloto 1/6 "Garry"
1 x	Rueda Jets 101x28 (4.0") centro aluminio
1 x	Rueda 152x46 centro aluminio Ø6.0 mm
1 x	Interruptor OPTO Gas Engine
1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Brazo servo aluminio V2-Futaba 1,25" M3 rojo
1 x	Brazo servo aluminio V2-JR 2,0" M3 dorado
1 x	Tapa de servo micro-mini 50x45 mm
1 x	Servo TOPMODEL S7520 MG
1 x	Bancada servo tandem 4-4,5" para 2 servos
1 x	Brazo servo aluminio V3-Futaba 1,0" rojo
1 x	Brazo servo aluminio V1-Futaba 15 mm M2 rojo
1 x	Brazo servo aluminio V2-Hitec 1,0" M3 azul
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Brazo servo aluminio V1-Futaba 20 mm M2 rojo
1 x	Bancada servo tandem 3,5-4" para 2 servos
1 x	Brazo servo aluminio V3-Futaba 1,25" M3 rojo
1 x	Brazo servo aluminio V2-Futaba 2,0" rojo
1 x	Brazo servo aluminio V1-Hitec 1,25" M3 azul
1 x	Brazo servo aluminio V1-Hitec 1,0" M2 azul
1 x	Brazo servo aluminio V2-Hitec 1,75" M3 azul
1 x	Bancada montaje servo S (rojo)
1 x	Brazo servo aluminio V2-Futaba 17 mm M2 rojo
1 x	Oracover Gris claro 2m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo allen M3x30 (10 pcs)
1 x	Tornillo allen M3x8 (10 pcs)
1 x	Bancada servo ala 13 mm
1 x	Sensor digital Air Speed con Pitot
1 x	Termo-retráctil verde tubo de 12,7x1000 mm 2:1
1 x	Cable BEC 30 cm (macho)
1 x	PVC termo-retráctil batería 135 mm transparente (1 m)
1 x	Adaptador 5 LiPos XH>EH
1 x	Destornillador allen 2,0x50 mm molibdeno
1 x	PVC termo-retráctil batería 58 mm transparente (1 m)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Termo-retráctil negro tubo de 2,4x1000 mm 2:1
1 x	Lija cóncava-convexa con papel de 13 mm
1 x	Bateria LiPo GRE18 600 mAh 7.4v
1 x	Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x	Ciano KAVAN Medium 20g
1 x	Terminales riostras M2 (10 uds)
1 x	Conector banana oro 5,5 mm
1 x	DPSI 2001 RV
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Cono 45 mm aluminio (Kavan)
1 x	Rueda superlight deluxe 150 mm hinchable (2 pcs)
1 x	Plancha contrachapado Abedul 600x300x1,2 mm

3,147.29EUR