120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	1/4 Pilot "Heidi"
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/4 Pilot "Mike"
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Straightened threaded rod M2-1m
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Piloto JET 1:3,5
1 x	Piloto jet 130 mm
1 x	1/12 Pilot "Fighter"
1 x	1/12 Pilot "Langley"
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "Tony"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	1/6 Pilot "John"
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
2 x	Bungee HLG Premium
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Gates hinge aluminium (1 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge
1 x	25 mm reinforced hinge
1 x	15 mm reinforced hinge
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Red aluminium servo arm V3-Futaba 3,5inch
1 x	ABS tube 4.0x3.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	L-shaped servo mount
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Rudder 2_Tray 4~4.5 inch
2 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Servo Mount S (red)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
2 x	Ferrita con funda
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Servo arm with 6 mm hole to FEMA 9800A
2 x	Blue aluminium servo arm V2-Hitec 1,75" inch M3
2 x	Red aluminium servo arm V2-Futaba 1,25" inch M3
2 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Professional Servo tester
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	HITEC DPC-11 programmer
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Servo inverter
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Hot Glue Stick GREEN
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	1/10 Pilot "Jimmy"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Angle support XT60 conector
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	1/10 Pilot "Jack"
1 x	Pilot "Goose" (Slimline)
1 x	Vasa model Catapult
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
2 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Jeti Black cap
1 x	13 mm wing servo holder
1 x	Ferrita 14x8x5.5 mm
1 x	Gold aluminium servo arm V1-JR 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Red aluminium servo arm V3-Futaba 3-3,5inch
1 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Servo Tester
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	BULLIT Wing 1095 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Concave-Convex sandpaper file 13 mm

6,911.75EUR