120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Tape GFK 50 mm
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x	ABS tube 12.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
3 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Horn 5/10 with M2 Bearing
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Gold antispark 5,5 mm plug
1 x	Cable set Premium™ MAXI "one4two"
1 x	102 mm aluminium spinner
1 x	Connectors DEANS (T)
1 x	Angle of incidence meter
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Premium servo extension 25cm
1 x	1/6 Pilot "John"
1 x	6 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M6
1 x	4 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M8
1 x	2,3 mm Prop Adapter M6
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	3 mm Prop Adapter M6
1 x	290 mm M4/4 mm Prop shaft
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Sandpaper file 13 mm
1 x	Mini-handed clamp
1 x	Kwik link unmount tool
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	3,0x60 mm allen screwdriver
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Hot Glue Stick GREEN
1 x	Sealing Iron Sleeve STD
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Precision wrench L100 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Buy Perforated film 100 cm / 20 m
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Buy Perforated film 100 cm / 10 m
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Glass fabric 390 g/m² aero,10x1m
1 x	Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Engine mounts for .09 - .19 engine
1 x	Ciano KAVAN Thin 20g
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	KAVAN Hand crank fuel pump

9,127.77EUR