120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

3 x	Motor A2212/13T
2 x	ABS angle 6,0x6,0x1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
2 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Extension 100 cm (Futaba)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Extension 90 cm (Futaba)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Propeller balancer
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension lead 15 cm Multiplex
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Allen wheel collar M3x3
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	280 cc gasoline fuel tank complet
1 x	Foaming agent for epoxy resins 200 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	CA Glue fast 20g
1 x	Ball Bearing Oil 25 ml
1 x	Birch plywood plate 600x300x2.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	12 mm floating pad (49 pcs)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Extension silicon 25 cm (Futaba)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	800TVL CMOS camera for FPV
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Ferrita 14x8x5.5 mm
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Conector MR-60 (pareja)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension 15 cm (Futaba)
1 x	Field folding model stand SebArt
1 x	Extension silicon 75 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	USB Mini Camera endoscope
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Extension silicon 100 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Extension silicon 10 cm (Futaba)
1 x	WingFix ULTRA Black Edition
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension 30 cm (Futaba)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Extension 7.5 cm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Propeller balancer
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 50 cm (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Premium servo extension 100cm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Field folding model stand
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 30 cm male (Futaba)
1 x	PT 16x10 E Propeller
1 x	80 mm rods set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	PT 22x10 EL Propeller
1 x	Ventus 1:4 set of instruments
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Canopy Latch
1 x	Allen wheel collar M3x5
1 x	38x4,5 mm wires output (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	100 mm rods set for direction control
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Jeti Black cap
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Ferrita con funda
1 x	Xoar Electric Beechwood Prop 24x8
1 x	PT 21x13 EL Propeller
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Ferrita 17x10x6.5 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Ferrita 27x14x7 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	41x5,5 mm wires output (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	140 mm rods set for direction control
1 x	PT 20x13 EL Propeller
1 x	45 mm rods + T patellas set for direction control
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	UHU hart 35 g
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	resin-hardener L-385 H-385 (625 g)
1 x	FOAM - CURE™ (24g)
1 x	1/12 Pilot "Langley"
1 x	MEKP Harderner 100 g
1 x	Epoxy 30 min. 200g
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	110x55 mm C SLH KOVO wheel
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	1/7 Pilot "Japanese"
1 x	UHU Por 50ml/40g
1 x	Mould Resin P 10 kg
1 x	Epoxy Resin L (2.5 Kg)
1 x	120x60 mm SLH KOVO wheel
1 x	Epoxy 5 min. 500 g (Resin)
1 x

4,039.76EUR