120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]


Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS Strip 1.0x3.0x1000 mm
2 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 2,5x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Round Rod 1,0x1000 mm
2 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x SE Ring 350 mm (2 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x Tape GFK 38 mm
1 x SE Ring 360 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 300 mm (2 pcs)
1 x Spikes Band (5 m)
2 x SE Ring 450 mm (2 pcs)
2 x 20x1000 mm Ring Strap Back To Back
1 x Marker ties (20 pcs)
1 x Ring 320 mm length (5 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Fixed launching hook
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Vasa model Catapult
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x "S" set for planes
2 x TAKEO 3.6m electric
1 x Glider Ka 7 Red (2540mm)
1 x Round Rod 1,25x1000 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x IKURA 4.0 m
1 x Reed valve for DA 50-R
2 x 
1 x X-RAY Micro QR
1 x Aero-Master Wings (Aero-naut)
1 x SAITO FG-36 carburetor
1 x Avia spare blue cockpit (Top Model)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x ASK 21 6.8m
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Extra hard 250 ccm complete gasoline fuel tank
1 x Fox 4000 mm (Airwold)
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x 1000 ccm complete gasoline fuel tank
1 x Fuselage Bags JEEMO
1 x Jeemo Dolly
1 x XICOY X45 rail
1 x Gracia Maxi ARF, spare wings (Top Model)
1 x Q-12 2000 mm Electric
1 x Wings Bags JEEMO
1 x Astra (Top Model)
1 x SE Ring 400 mm (2 pcs)
1 x Battery RX JETI LiIon RB 6200 7.2v
1 x Xplorer2 anemometro
1 x Xplorer3 anemometro
1 x Oracover GREY Seafire Sea 2m
1 x Black silicone 0,25 mm² wire (25 m)
1 x White smoke canister 65 g
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x "M" set
1 x Smoke set "S"
1 x White smoke bombs AX-9 (10 pcs)
1 x Rocket D3-P
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Recessed MPX connector support (6 pcs)
1 x Motor OS 46 AX II
1 x 50 mm aluminium spinner (Kavan)
1 x Tank Kevlar ASPIRE 6 L Kero
1 x 2.5 inch aluminium core wheel (1 pcs)
1 x 
1 x Concave-Convex sandpaper file 13 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Wheel FEMA 82 mm / 5 mm
1 x Wheel FEMA 70 mm / 5 mm
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Extension Arm for Carburetor (red)
1 x Suction funnel for carburetor 90D-M (red)
1 x Motor OS FS 95 AX
1 x OS 37 SZ-H, Connecting rod
1 x Motor OS 55 AX
1 x Soporte grifo FESTO (2 pcs)
1 x OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x Ciano KAVAN Thin 20g
1 x F9F COUGAR Grey ARF 1.562 mm
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Wheel FEMA 165 mm / 8 mm
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Wheel 22 mm
1 x Crawler GRE-24 RTR 1:24 Arena
1 x Wheel FEMA 127 mm / 6 mm
1 x BETA 1400 ARF Red
1 x ASPIRE Red ARF 2.000 mm, Set Elevators
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Wheel 38 mm V2
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Tire ODYSSEY Ø 89mm
1 x 
1 x F4E Phantom Scale 1:7
1 x Dummy motor GPW Wasp Scale 1/4
1 x Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Wheel FEMA 152 mm / 8 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Ciano KAVAN Thick 20g
1 x 60 mm aluminium spinner (Kavan)
1 x A/C quality beech plywood 600x300x0.8 mm
23,510.92EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies