120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/XT60
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CM-3
1 x	Adapter lead MPX/EC3
1 x	Circlick securite
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Pine wood slat 10x10x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	BALSA leading edge 8x10x1000 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	CC 05
1 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	CC 03
1 x	Beech dowels 10 mm x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	3 LiPo XH>EH adapter
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	USB HLS prog. interface
1 x	Dean "T" - Futaba Adapter
2 x	JETImodel SINGLE BEC
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	TrainerCord (master-learner)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Beech dowels 4.0 x 1000 mm
1 x	BEC 3A FOXY
1 x	CC 02
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
2 x	SE Ring 450 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Spikes Band (5 m)
2 x	SE Ring 480 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 50 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	20x200 mm battery rings
1 x	Xplorer2 anemometro
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Vacuum bag, 1200 mm x 50 m
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	ABS angle 3,0x3,0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	25 mm reinforced hinge
1 x	ABS tube 18.0x16.0x1000 mm
1 x	12V Car Adapter
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	DPSI Ampere battery backer
1 x	JETImodel Addcap 1640
1 x	BALSA trip 10x10x1000 mm
1 x	Cabling for Fox MDM1 wings
1 x	SBEC 30 D
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Extension 5 lipos JST - JST/C
1 x	MAX BEC
1 x	UBEC 6A KAVAN
1 x	Long Switch On/Off micro
1 x	Interruptor RX/Batterie
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
2 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 360 mm (2 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Profile ABS half cane 4x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "John"
1 x	1/10 Pilot "Jimmy"
1 x	1/12 Pilot "Langley"
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Carbon plate 350x150x0.5 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	ABS angle 2,0x2,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon plate 350x150x1.0 mm
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Chopped glass fibre strands 3 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Glass fibre sleeve Ø 20 mm
1 x	Chopped glass fibre strands 3 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 170 M- Paramotors

7,394.66EUR