120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Funda Protectora cables Ø 6 mm 1000 mm
1 x	Cable silicona 1,0 mm2 rojo (25 m)
1 x	Funda Protectora espiral negra cables Ø 0,5/50 mm - 25 m
1 x	Funda Protectora cables abierta Ø 13 mm 1000 mm
1 x	Cable servos silicona 0,35 mm2 Futaba (5 m)
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Funda Protectora cables Ø 10 mm 1000 mm
1 x	Funda Protectora cables Ø 20 mm 1000 mm
1 x	Cable Cargador FUTABA
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Funda Protectora cables abierta Ø 6 mm 1000 mm
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Cable servo 5 lineas negro (1m)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Cable silicona 0,5 mm2 azul (50 m)
1 x	Funda Protectora cables Ø 15 mm 1000 mm
1 x	Soporte para cables L 10 mm (6 pcs)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x	Cable silicona 2,5 mm2 negro (25 m)
1 x	Funda Protectora cables Ø 3 mm 1000 mm
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Cable silicona 0,25 mm² verde (25 m)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Conexion PREMIUM fuselaje/alas para dos servos MPX 120/40 cm
1 x	Conexion PREMIUM fuselaje/alas 120/40 cm one4one
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Prolongador S-Bus 1-2 silicona 30 cm
2 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Prolongador silicona 10 cm (Futaba)
1 x	Prolongador cable servo POWERBOX 75cm
2 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador cable servo POWERBOX 25cm
2 x	Prolongador 30 cm (Futaba)
1 x	Prolongador cable servo POWERBOX 50cm
1 x	Horn de mando 6/27 con rótula M3
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Horn con ball 55x40
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Cable con accesorios
1 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
2 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Prolongador 90 cm (Futaba)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
2 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Extension silicona 35 cm macho (Futaba)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Prolongador S-Bus JR/JR 10cm
3 x	Circlick seguridad
1 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
2 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Horn de mando 5/10 con rótula M2
1 x	Horn de mando 5/20 con rótula M2
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn de mando carbono 20 mm
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Prolongador 15 cm (Futaba)
1 x	Conjunto de mandos arriostrados
2 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Varilla ABS 1,0x1000 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Gancho de lanzamiento regulable
1 x	Gancho de lanzamiento fijo
1 x	Gancho de remolque hasta 3m
1 x	Gancho de remolcador
1 x	Gorra Hispano Aviación
1 x	Chaleco Hispano Aviación
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
2 x	Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x	Prolong. XH / XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x	Papel seda japones 12 grs/m2 760x510 mm JAPICO
1 x	Cable servos silicona 0,14 mm2 Graupner (5 m)
1 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
2 x	Horn 16,5x20 mm (2 pcs)
2 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Prolongador 7.5 cm
1 x	Plancha carbono 350x150x1.0 mm
1 x	Adaptador para motor A50-V3
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Plancha fibra vidrio 350x150x1.0 mm
1 x	Plancha carbono 350x150x3.0 mm
1 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
2 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Plancha ABS 500 x 400 x 1 mm (blanco)
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Peel Ply liso 95 g/m2 100 mm x 100 m
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Horn de mando 6/20 con rótula M3
1 x	Varilla ABS 3,0x1000 mm
1 x	Fibra de vidrio 25 g/m² 5000x1270 mm
1 x	Gancho remolque inferior plano
1 x	Fibra de vidrio 163 g/m² 1 m x 5 m (Twill)
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Fibra de vidrio 49 g/m² (1,27 x 10m)
1 x	Fibra de vidrio 49 g/m² (1,10 x 20m)
1 x	Varilla carbono 1.0 mm x 1000 mm
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	SOLARFILM Lite AZUL Transparente (5m)
1 x	Bomba electrica Fuel 12v

3,077.07EUR