120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

2 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	1,6x1000 mm 2:1 black termoretract tube
2 x	Oracover Azul 2 m
2 x	2,4x1000 mm 2:1 green termoretract tube
2 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	Oracover Black 2 m
1 x	19 mm 2:1 black termoretract tube
2 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,6x1000 mm 2:1 red termoretract tube
2 x	MYLAR film A350 (1000x500 mm)
2 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Monokote PLATINO metalizado (1.8x0.65m)
2 x	6,4x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 black termoretract tube
2 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
2 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Oracover Azul Cielo 2 m
3 x	6,4x1000 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
2 x	Oracover Brown 2 m
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Stratus
1 x	Glases Innovation Plus
1 x	Glases Moritz
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Crimping tool
1 x	Conector MR-60 (pareja)
1 x	Turbina KINGTECH K320 G5
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Adaptadores carga 6s JST-XH
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
2 x	Bungee HLG Premium
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Copier 2x20 cm pcs
1 x	Z Bender - S Type Tool
1 x	Cockpit plastic closing
1 x	Z Bender - S Type Tool
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Hot Glue Stick GREEN
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Tube Pitot to PIXHAWK
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Vacuum pump 12 CFM
2 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Oracover Black 10 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover CARBON Metalic 1 m
1 x	Cinta Goldfix 1m
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	GPS Sensor + Logger OPTronics
1 x	Vasa model Catapult
1 x	Receptor CORE PBR-26XS 26ch
1 x	Starter Sullivan-STAR 601
1 x	Cut tube
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Allen wheel collar M4x6
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Digital precision scale up to 2000 g
1 x
1 x	Smart Soldering Iron 110W/230V AC
1 x	Ball Link Plier
1 x	1,5x50 mm allen screwdriver
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Allen wheel collar M3x5
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Pushrod octagone 4/3
1 x	28x5 mm wires output (2 pcs)
1 x	Copier 5x20 cm pcs
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Screwdriver for Hexagon 1,5mm
1 x	11 mm Rubber pads (14 pcs)
1 x	Dust collector for mould cleaning
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Sealing Iron Sleeve PROF
1 x	Hot Glue Stick RED
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Starter EM Gear Power 250
1 x	Crystal Universal RX 35.070 Ch 67
1 x	45 mm rods set for direction control
1 x	Cable grommet 9.5 mm (4 uds)
1 x	18 mm reinforced hinge

11,394.97EUR