7.00EUR

26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2228]

13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita con funda
2 x	SUS wire 3m (nylon coated)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 3.2x142 (uds)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
3 x	Steering arm 16 mm Ø 3 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	One touch canopy lock
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Covered closure or fairings
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Cockpit plastic closing
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	30 cm BEC cable (female)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 01
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	USB Mini Camera endoscope
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Dean "T" - Futaba Adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	30 cm BEC cable (male)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	TrainerCord (master-learner)
2 x	2 LiPo XH>EH adapter
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M2 (10 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	Pine wood slat 10x10x1000 mm
3 x	Beech dowels 2.0 x 1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA triangular 10x10x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 100 cm (Futaba)
1 x	Premium servo extension 25cm
1 x	Cable S.BUS 3 salidas 300 mm
2 x	Extension silicon 35 cm male (Futaba)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Circlick securite
3 x	Futaba Female 40 cm extension
2 x	Prolongador S-Bus JR/JR 10cm
3 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Extension 90 cm (Futaba)
2 x	Cabel "Y" 30 cm (Futaba)
2 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 100 cm (Graupner)
2 x	Futaba Female 40 cm extension
2 x	Extension 30 cm (Futaba)
1 x	Extension 15 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Extension lead 15 cm Multiplex
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Cabel "Y" 15 cm
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Smoke set "Glider"
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support FUEL DOT V3
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Universal batery Tester
1 x	Soporte grifo FESTO (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Clip fixing for wing (2 pcs)
1 x	Allen wheel collar M3x5
1 x	Cockpit aluminium closing 4.7g
1 x	38x4,5 mm wires output (2 pcs)
1 x	100 mm rods + T patellas set for direction control
1 x	Cockpit metalic closing
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Window mounting channel 5m
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Snap short M2 (10 uds)
2 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Sanyo RX Battery Eneloop 6,0 V Futaba
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	BALSA trip 10x10x1000 mm
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Screw-lock connector M2 (2 uds)
2 x	Extension 7.5 cm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 25 cm (Futaba)
1 x	Switching module high voltage SXH
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Opto Gas Engine Kill Switch
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Connector Sub-D 2+5 Female
1 x	800TVL CMOS camera for FPV
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Connector CAN 15
1 x	CC 05
1 x	PSC 6
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	USB HLS prog. interface
1 x	4 LiPo XH>EH adapter
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Extension silicon 25 cm (Graupner)
1 x	Futaba male 40 cm extension
2 x	Extension silicon 10 cm (Graupner)
2 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 10 cm (Futaba)
1 x	1000 ccm gasoline fuel tank
1 x	60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x	29x12 prop Super Silence

3,388.01EUR