7.00EUR

20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2226]

20mm self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

2 x	Flat washer 2.2 mm (20 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
1 x	M3 black washers (4 pcs)
2 x	Aluminium wide washer M4 Gold (4 pcs)
3 x	Quicklock washer 1 mm (10 pcs)
2 x	Aluminium cap bolt washer M3 blue (8 pcs)
2 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
2 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
2 x	Circlik for shaft 1.9 mm (10 pcs)
2 x	Aluminium wide washer M3 gold (4 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
2 x	Lock washer 3.2 mm (20 pcs)
3 x	Flat washer 3.2 mm (20 pcs)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Xplorer2 anemometro
1 x	3l Smoke oil
1 x	Red smoke canister 100 g
1 x	White smoke canister 140 g
1 x	Smoke set "M"
1 x	Green smoke canister 65 g
2 x	AX-60 starters (5 pcs)
1 x	Electric rocket starters (6 pcs)
1 x	Blue smoke canister 100 g
2 x	White smoke canister 65 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Smoke set "Glider"
1 x	Yellow smoke canister 65 g
1 x	White smoke bombs AX-18 (5 pcs)
2 x	White smoke bombs AX-9 (10 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	White smoke bombs AX-60 (5 pcs)
2 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Remote electric ignition system
3 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 100 g
1 x	Green smoke canister 140 g
2 x	Smoke set "S"
2 x	Initior Receiver FRX2 Wireless
1 x	PCARD Wireless System
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Spannlack 1000 ml
2 x	Oracover GREY Seafire Sea 2m
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Glases Stratus
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support Flush MPX Conector (6 pcs)
2 x	Mudguard wheels 112/127 mm
1 x	Trailing leg 131 mm
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Axle wheel with accesories
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Retract undercarriage
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
2 x	Screw M2.5x10 (10 pcs)
1 x	Nylon Screw M4x20
1 x	460 mm EPP Floats
1 x	Pan Head Screw M2x8 PH
1 x	Sprung retractable undercarriage (Alfa model)
1 x	Screw M4x20 (10 pcs)
1 x	Pan Head Screw M2x6 PH
2 x	Blind nut M6 (4 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	ABS tube 5.0x4.0x156 mm
2 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Blind nut M6 (4 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
2 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	20x200 mm battery rings
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 25 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Marker ties (20 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 38 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 200 mm (2 pcs)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector MT-60 (pair)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector JR Servo male (10 pcs)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banna oro 0,8 mm (M/F)
2 x	Conector JR Servo male (50 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Xplorer1 anemometro
1 x	Power supply NT 25 Amp.
1 x	AX-60 starters (5 pcs)
1 x	Kontronik ProgUnit
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	"M" set
1 x	Set cintas unión paracaídas 145 cm
1 x	Ballast 700gr OPALE
1 x	Wing OXY 0,5 pulgadas2
1 x	Para-RC Mix
1 x	Windsock Ozone L -1200 mm
1 x	MAX pilot ARTF
1 x	Wing OXY 5,0 m2
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Cooler motor type 150
1 x	Support ECU Xicoy X-45
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Filtro FESTO
1 x	Recessed MPX connector support (6 pcs)
1 x	Tailwheel for 1-3 kg models
1 x	M3-M4 rubber washer (8 pcs)
1 x	Wheel FEMA 70 mm / 5 mm
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Tailwheel for 60/120 size
1 x	Tail wheel for 5-8 kg models
1 x	Tailwheel for F3A size
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Angled clevis with threaded rod M3
1 x	Wheel FEMA 90 mm / 6 mm
1 x	Metal ring front FEMA
1 x	Gearwheel 9724/09 for ZG 45
1 x	Compact on-board starting system (9715)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Wheel FEMA 112 mm / 6 mm
1 x	300 Newtons FEMA absorber
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Compact on-board starting system (9525)
1 x	Wheel FEMA 127 mm / 6 mm
1 x	100 Newtons FEMA absorber
1 x	Pan Head Screw M1,6x8 (10 pcs)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Covered closure or fairings
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Conector BEC male (10 pcs)
1 x	MR30 connector female
1 x	Magnetic Connect locking system
1 x	Connectors DEANS (T) micro
1 x	Conector XT-30 (hembra)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Conector MR-60 (pareja)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Central piece 52 mm - 5º
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	Central piece 42 mm 0º [12 mm]
1 x	Axi for MVVS 3.5 Sport
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Lock nut M3 (10 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Nut for mounting M3 (10 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Nylon Screw M6x40
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Screw M3x5 (10 pcs)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	Screw M3x30 (10 pcs)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	10 mm floating pad (72 pcs)
1 x	Pan head screw M2x16 PH
1 x	Stainless steel cable Ø 0.62 mm (10 m)

7,519.33EUR