0.00EUR

8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2238]

8 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Interface Realflight Simulator
1 x	EasyFLY Addon
1 x	Slave-cable USB Easy Sim
1 x	Glases Nimbus "Black"
1 x	Glases Flitemaster
1 x	Glases Ace
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension silicon 10 cm (Graupner)
2 x	Extension silicon 30 cm female (Graupner)
2 x	Extension lead 15 cm Multiplex
3 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Futaba Female 40 cm extension
2 x	Extension silicon 25 cm (Graupner)
3 x	Extension silicon 10 cm (Futaba)
2 x	Circlick securite
1 x	Extension silicon 50 cm (Graupner)
2 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 100 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
4 x	Extension silicon 75 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
2 x	Extension silicon 75 cm (Graupner)
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 35 cm (Futaba)
1 x	200 mm extensión servo HITEC/JR
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
2 x	Extension silicon 25 cm (Futaba)
1 x	Premium servo extension 100cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Cabel "Y" 30 cm (graupner)
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 50 cm (Futaba)
2 x	Futaba Female 40 cm extension
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Clip mini fixing for wing (2 pcs)
1 x	Allen wheel collar M4x6
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	45 mm rods set for direction control
1 x	80 mm rods set for direction control
1 x	45 mm rods + T patellas set for direction control
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Allen wheel collar M3x5
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	28x5 mm wires output (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	140 mm rods set for direction control
1 x	Clip fixing for wing (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Head lower part
1 x	Steering lever
1 x	Bearing 3x6x2,5
1 x	Cierva C30 spanish decoration Stickers
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Carbon plate 350x150x1.0 mm
1 x	Carbon plate 350x150x3.0 mm
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
3 x	Extension PVC 150 cm (Graupner)
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
2 x	Extension silicon 35 cm male (Futaba)
2 x	Premium servo extension 75cm
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Gates hinge
1 x	Miniature brass strap hinge, 1 m
1 x	15 mm reinforced hinge
1 x	Pin hinge 39x20 mm (10 uds)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Balsa panel 2.5x100x1000 mm
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Extension 15 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension 7.5 cm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Pin hinge 26x11 mm (10 uds)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	25 mm reinforced hinge
1 x	Indoor hinge with servo arm integraded
1 x	Medium pin type hinge (12 uds)
1 x	RANGER Jet Red/White 1.854mm combo
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	102 mm INO spinner (carbon imitation)
1 x	F9F COUGAR Red ARF 1.562 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	89 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Boomerang ELAN THUNDERBIRD Combo
1 x	63 mm INO spinner (carbon imitation)
1 x	57 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	ULTIMATUM 2.0 m Red Bull
1 x	Bags de Luxe ODYSSEY
1 x	ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x	Set Legs + Wheels with brake ASPIRE
1 x	36 mm black plastic spinner for fixed propeller
1 x	42 mm white plastic spinner for fixed propeller
1 x	45 mm black plastic spinner for fixed propeller
1 x	ASPIRE Red ARF 2.000 mm, Set Alas
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	PARKMASTER PRO Kit + (RR)
1 x	Potenciometro micro
1 x	HERON RR
1 x	41x5,5 mm wires output (2 pcs)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	GameCommander USB Universal
1 x	Premium servo extension 50cm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Flap hinge (6 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Small flex hinge (12 uds)
2 x	Long pinned hinge (6 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	FunCup XL RR
1 x	Extension 90 cm (Futaba)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Landing gear frontal support 25x32x16
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Spring Clip Ø25 mm
1 x	Cylinder ZG 26SC/SLH
1 x	CNC cut
1 x	Pine wood slat 3.0x5.0x1000 mm

23,206.53EUR