7.00EUR

26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2228]

13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	Horn with ball 40x30
3 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Small aluminium horn red (2pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn 5/10 with M2 Bearing
1 x	Oracover White 2 m
1 x	Oracover Brown 2 m
1 x	Oratex Natural White 2m
1 x	Oratex Antik 2m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oracover GREY Seafire Sea 2m
1 x	Oratex Yellow Cub 10 m
2 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Black 10 m
1 x	Cinta Goldfix 1m
1 x	Round Rod 1,0x1000 mm
2 x
2 x	Round Rod 5,0x1000 mm
1 x	Tape GFK 38 mm
2 x	ABS Strip 1.0x4.0x1000 mm
2 x	Round Rod 1,5x1000 mm
2 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	SE Ring 200 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 250 mm (2 pcs)
2 x	Round Rod 2,0x1000 mm
2 x	SE Ring 450 mm (2 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Spikes Band (5 m)
2 x	Strip ABS 2.0x10.0x1000 mm
3 x	Ring 320 mm length (5 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	Tape GFK 25 mm
2 x	Foil for sticking flaps and ailerons
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Strip 2,5x1,25x330 mm
2 x	Strip 2,0x2,0x330 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	ABS Strip 1.5x8.0x1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Long ball link M1.6 (6 uds)
2 x	SE Ring 360 mm (2 pcs)
1 x	Support pump Xicoy X45
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Extra long horn 60x30
2 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Short adjustable control horn 3x24
1 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Horn mando long (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Control horn long w/ball
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Oracover Yellow CADMIO 2 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	SE Ring 240 mm (2 pcs)
1 x	Small adjustable control horn with bearing
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Yellow CUB 2 m
1 x	Round Rod 2,5x1000 mm
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Silicone black 4,0 qmm wire ( 1 m)
1 x	Silicone red 4,0 qmm wire ( 1 m)
1 x	Split M1,2x10 (10 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	Snap short M2 (10 uds)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Propeller POWER-PROP 7x7
1 x	Long adjustable control horn with bearing
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	Ply-Span 450x600/13g White
2 x	Round Rod 4,0x1000 mm
2 x	Oracover Verde 2 m
1 x	Oracover Red 2 m
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Ply-Span 450x600/13g Orange
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	12.7 mm 2:1 black termoretract tube
1 x	Ply-Span 450x600/13g Black
1 x	Oracover White 10 m
1 x	Oratex Red Fokker 10 m
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Micro control horn T2 Ø 1
1 x	SE Ring 350 mm (2 pcs)
1 x	ABS I Strip 10x5x1000 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Allen wheel collar M4x6
1 x	Strip 3,5x1,75x330 mm
1 x	KAVAN Hand crank fuel pump
1 x	Support Filtro FESTO
1 x	Spinner NUT M5
1 x	Spinner NUT M8x1,25
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	KIRA 600-20 6,7:1
1 x	Servo-V-Limiter 5.2V
1 x	4 mm Prop Adapter M8
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Control for forward wheel (MINI)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Oratex Natural White 20m
1 x	Oratex White 2m
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	20x10 BIELA propeller (4-blades) Corsair Scale
1 x	Cylinder for ZG20
1 x	Piston ring for DA-50R and DA-100
1 x	‎Reed valve for DA-60/70

3,530.37EUR