330.00EUR

ZENOAH ZG 26SLH Helicopter Engine
[TC2666]

Titan ZG 26SLH Helicopter Engine 26 ccm

New cylinder for considerably more power and efficient cooling.
Very thin piston ring for minimal friction and maximum power.
Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.
Small Champion spark plug RZ7C with 10 mm thread.
Compact diecast crankcase.
Double counterbalanced crankshaft, very accurately aligned for the necessary concentric running, supported in three ballbearings. Needle roller bearings in conrod.
Walbro carburetor fitted with a priming pump to fill the carburetor for starting and a efficient airfilter intake silencer with integrated choke flap.
Robust pullcord starter

The new cylinder with the very thin high performance single piston ring is adapted from the extremely high power G230RC car engine for helicopter use. This new cylinder has four retaining screws as apposed to two for the G230RC cylinder. The extremely wide cooling fins are invaluable for helicopter use.
Other components are also optimized for helicopters, for example the crankshaft is very accurately aligned for the necessary concentric running. There is a very robust pullcord starter as well as very efficient airfilter intake silencer fitted to this engine. The carburettor is fitted with small priming pump to fill the carburettor for starting.
The Walbro carburettor is extremely reliable, is designed for the higher rpm involved, the completely dependable magneto ignition without contact breaker, the clean running due to low dilution full synthetic oil resulting in the absence of the smelly smoke trail, the availability of the fuel at every filling station with it?s very low price. These are some of the arguments resulting in the popularity of first the ZG 22 and then the ZG 23SLH, are now exactly relevant to the ZG 26SLH.

Specifications:
Capacity: 25,4 ccm
Bore: 34 mm
Stroke: 28 mm
Compression ratio: 8.8 eff.
Power: 2.2 hp/1.62 kW
Torque: 1,48 Nm
Power with tuned pipe: >3.0 hp/>2.2 kW
Weight: 1580 g without muffler
Fuel: 1:40 BEL RAY H1-R / Petrol

under request

Reviews

Quick Find

Shopping Cart

1 x	Jeti Black cap
2 x	Stickers-digit for marking
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Strip 1,5x1,5x330 mm
2 x	ABS tube 9.0x8.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Round Rod 5,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
3 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
2 x	ABS tube 12.0x10.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
3 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Strip ABS 2.0x5.0x1000 mm
3 x	ABS tube 7.0x6.0x1000 mm
3 x	ABS tube 7.0x5.0x1000 mm
2 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS Strip 1.0x2.0x1000 mm
2 x	ABS Strip 1.0x3.0x1000 mm
2 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
2 x	Round Rod 1,25x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
2 x	ABS tube 20.0x18.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Round Rod 1,5x1000 mm
2 x	ABS tube 18.0x16.0x1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Ferrita 27x14x7 mm
2 x	Ferrita 14x8x5.5 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Suncover 100cc Red
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 3.0x2.0x330 mm
2 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
2 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	ABS tube 5.0x4.0x156 mm
3 x	ABS tube 6.0x4.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	DPSI V-Match
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	DPS Switch JR/JR
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	120x60 mm SLH KOVO wheel
2 x	Electronic switch JETI SP06 Opto
1 x	Extension 5 lipos JST/C
1 x	Interruptor SPS 70v 60/120A
1 x	Multi-adapter balancer JST/C - TP
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Switc electronic 30 Amp
1 x	Opto Gas Engine Kill Switch
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 10 cm (Graupner)
1 x	JETImodel DPS 40
1 x	Extension silicon 30 cm female (Graupner)
1 x	MAX BEC 2D plus EX
1 x	Long Switch On/Off micro
1 x	Extension 100 cm (Futaba)
2 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba male 40 cm extension
1 x	Cabel "Y" 30 cm (graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cable S.BUS 3 salidas 300 mm
1 x	200 mm extensión servo HITEC/JR
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 10 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension 15 cm (Futaba)
2 x	Extension silicon 35 cm male (Futaba)
1 x	Premium servo extension 25cm
1 x	SPS 70V 100/200 A
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Cable Cargador FUTABA
2 x	26x12 prop Super Silence
1 x	3-blades 27x12 carbon prop Super Silence
1 x	100g Flux Paste for Silver Solder
1 x
1 x	22x10 prop Super Silence
1 x	3-blades 30x12 carbon prop Super Silence
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
2 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Adapter 3,2 mm M8
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Adapter 3,2 mm M6
1 x	4 mm Prop Adapter M6
1 x
1 x
1 x	Adapter 5,0 mm M8
1 x	FIALA Propeller 19x12 Electric
1 x	Ferrita con funda
1 x	Motor holder AXI
1 x	Electric coversion set
1 x	A60 Motor Mount Alu complete set
1 x	AXI 2820/8 V2 Long
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Soporte grifo FESTO (2 pcs)
2 x	Ferrita 17x10x6.5 mm
1 x	Extension 7.5 cm
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Allen wheel collar M4x4
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	5 mm Prop Adapter M6
1 x	2 mm Prop Adapter M5
1 x	3,2 mm Prop Adapter M5
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	10 mm dogdrive props
1 x	2,3 mm Prop Adapter M5
1 x	Adapter 3,0 mm M8
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 4,0 mm M6
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Allen wheel collar M3x5
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	3 mm Long Prop Adapter M5
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	2,3 mm Prop Drive Günther M4
1 x	5 mm Prop Adapter M8
1 x	Adapter 3,0 mm M6
1 x	Adapter 4,0 mm M8
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	6 mm Prop Adapter M8
1 x	Propeller FIALA 15x8 3-Blade
1 x	FIALA Propeller 23x8 Electric
1 x	Size "M" motor holder for class 400
1 x	AXI 2808/16 V2
1 x	AXI 2826/8 V2
1 x	AXI 4120/14 V2
1 x	AXI 2820/12 V2 Long
1 x	DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal
1 x	Fournier RF-4D
1 x	Stainless Steel Silencer side outlet for ZG 20/23/26
1 x	Gasket carburettor/insulator for ZG 38/S/SC
1 x	Muffler ZG 38/S/SC
1 x	28x12 prop Super Silence
1 x	Dia. 16x35 mm PTFE tube for escape
1 x	ZENOAH ZG 26SC with magneto ignition
1 x	Tygon tube 6.35 - 3.18 mm 1m
1 x	Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt)
1 x	Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x	Focke Wulf FW-190A-8 93" (2362 mm)
1 x	P-51D "Old Crow" 89" (2260 mm)
1 x	ZERO Fighter A6M52 93" (2362 mm)
1 x	AXI 2814/16 V2 Long
1 x	2020/20 frontal part with magnets
1 x	AXI 2808/20 V2
1 x	Adpater for mounting VMKG gearbox in 480 motor
1 x	3-blades 24x12 carbon prop Super Silence
1 x	Gasoline filter

11,740.37EUR