330.00EUR

ZENOAH ZG 26SLH Helicopter Engine
[TC2666]

Titan ZG 26SLH Helicopter Engine 26 ccm

New cylinder for considerably more power and efficient cooling.
Very thin piston ring for minimal friction and maximum power.
Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.
Small Champion spark plug RZ7C with 10 mm thread.
Compact diecast crankcase.
Double counterbalanced crankshaft, very accurately aligned for the necessary concentric running, supported in three ballbearings. Needle roller bearings in conrod.
Walbro carburetor fitted with a priming pump to fill the carburetor for starting and a efficient airfilter intake silencer with integrated choke flap.
Robust pullcord starter

The new cylinder with the very thin high performance single piston ring is adapted from the extremely high power G230RC car engine for helicopter use. This new cylinder has four retaining screws as apposed to two for the G230RC cylinder. The extremely wide cooling fins are invaluable for helicopter use.
Other components are also optimized for helicopters, for example the crankshaft is very accurately aligned for the necessary concentric running. There is a very robust pullcord starter as well as very efficient airfilter intake silencer fitted to this engine. The carburettor is fitted with small priming pump to fill the carburettor for starting.
The Walbro carburettor is extremely reliable, is designed for the higher rpm involved, the completely dependable magneto ignition without contact breaker, the clean running due to low dilution full synthetic oil resulting in the absence of the smelly smoke trail, the availability of the fuel at every filling station with it?s very low price. These are some of the arguments resulting in the popularity of first the ZG 22 and then the ZG 23SLH, are now exactly relevant to the ZG 26SLH.

Specifications:
Capacity: 25,4 ccm
Bore: 34 mm
Stroke: 28 mm
Compression ratio: 8.8 eff.
Power: 2.2 hp/1.62 kW
Torque: 1,48 Nm
Power with tuned pipe: >3.0 hp/>2.2 kW
Weight: 1580 g without muffler
Fuel: 1:40 BEL RAY H1-R / Petrol

under request

Reviews

Quick Find

Shopping Cart

3 x	SE Ring 330 mm (4 pcs)
2 x	Cinta Goldfix 1m
1 x	SE Ring 250 mm (2 pcs)
3 x	SE Ring 350 mm (2 pcs)
4 x	Tape GFK 38 mm
1 x	Tape GFK 25 mm
3 x	Marker ties (20 pcs)
3 x	SE Ring 200 mm (2 pcs)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
4 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	SE Ring 450 mm (2 pcs)
3 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Tape GFK 50 mm
3 x	20x200 mm battery rings
3 x	SE Ring HACKER 300 mm (2 pcs)
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
4 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Spikes Band (5 m)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x	Bungee HLG Premium
2 x	Vasa model Catapult
1 x	Optical RPM Sensor
2 x	ABS angle 3,0x3,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Foil for sticking flaps and ailerons
2 x	L-Connector 1.5 mm x 1000 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	SE Ring 240 mm (2 pcs)
2 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	SE Ring 360 mm (2 pcs)
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Spray EC Red 400ml
1 x	Nitroverdu 500 ml
1 x	MAX pilot ARTF
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Suncover 100cc Red
1 x	24x12 prop Super Silence
1 x	29x12 prop Super Silence
1 x	3-blades 29x12 carbon prop Super Silence
1 x	3-blades 30x12 carbon prop Super Silence
1 x	30x14 prop Super Silence
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	1/6 Pilot "Garry"
1 x	Profile ABS half cane 5.0x1000 mm
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Rocket D3-P
1 x	Rocket D9-7
1 x	Rubber profile 6-2 mm 2M
1 x	BALSA trip 10x10x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	Challenger ARF (Top Model)
1 x	CYCLONE XT 6.2m ARF
1 x	HERON RR
1 x	DELPHIN Race 3.6m c64
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	SE Ring 400 mm (2 pcs)
1 x	110x55 mm SLH KOVO wheel
1 x	1/6 Pilot "Tony"
1 x	Profile ABS Square 4 x 1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	280 cc gasoline fuel tank complet
1 x	L-Connector 4.0 mm x 1000 mm
1 x	120x60 mm SLH KOVO wheel
1 x	102 mm INO spinner (carbon imitation)
2 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	5 mm Prop Adapter M6
1 x	3 mm Short Prop Adapter M5
1 x	Support conector MPX (6 pcs)
1 x	Propeller 3x3
1 x	Piston for G230RC and ZG 231SLH
1 x	3-blades 27x12 carbon prop Super Silence
1 x	Screw for mounting plate of DA100/120
1 x	3-blades 28x12 carbon prop Super Silence
1 x	3-blades 24x12 carbon prop Super Silence
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Filtro FESTO
1 x	Support XT60 conector (2 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support pump Xicoy X45
1 x	Support pumb/filter Xicoy X45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Medidor ángulos y/o incidencias
1 x	ALBATROS 3.0 m (orange/white)
1 x	Giant Scale Muffler D.A. 170 (2 pcs)
1 x	Giant Scale Muffler D.A. 70 (2pcs)
1 x	Prop hub screw DA85/100/120 & VM170/200/210
1 x	Gasoline filter
1 x	3-blades 20x10 carbon prop Super Silence
1 x	Propeller 10x4,7 SlowFlyer
1 x	Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x	Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH
1 x	Propeller 9x4,7 SlowFlyer
1 x	Spring Clip 28 mm teflon tube
1 x	Spring Clip 25 mm teflon tube

7,473.73EUR