339.90EUR

ZENOAH ZG 26SC with magneto ignition
[TC2626]

ZENOAH ZG 26SC with magneto ignition

Walbro pump carburettor with choke and intake trumpet.
New cylinder for considerably more power and efficient cooling.
Very thin piston ring for minimal friction and maximum power.
Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.
Small Champion spark plug RZ7C with 10 mm thread.
Compact diecast crankcase.
Double counterbalanced crankshaft, supported in three ballbearings. Needle roller bearings in conrod.
The Titan ZG 26SC. is the result of constant development over the years. Only the front bearings, exhaust gasket and several screws are the same as the Titan ZG 22.
The new cylinder is the most prominent change in the outward appearance of the Titan ZG 26SC. It is not only optically perfect but the power this cylinder produces will meet the stringent demands of most 3D FunFlyers. The piston is fitted with a thin high performance single ring which considerably reduces surface friction with the cylinder. In addition to more power, this piston rings low drag, allows a lower reliable tickover speed.
For small glider tugs such as the "Big Lift" the Titan ZG 26SC is ideal. It uses a liter fuel for about an hours towing. The fuel can be bought cheaply at the petrol station even on Sundays.
Best two stroke mix is lead free normal grade petrol and Bel Ray H1R at a ratio of 1:50. You need neither starter or battery. Due to the built-in pump you can place the tank where you wish. Unlike with Methanol fuels corrosion is no problem at all.
Recommended propellers are the Fiala 18x8", 18x6" and the 17x8".
The Titan ZG 26SC is supplied with silencer, intake tube, carburettor servo linkage, motor mount and spark plug box spanner. The very detailed instructions provide the newcomer to petrol engines with a great deal of information and tips. A 500 cc tank with a cotton felt filter and fuel tubing is all you require to get in the air!

Models of our customers
Specifications:
Capacity: 25,4 cm3
Bore: 34 mm
Stroke: 28 mm
Effective compression ratio: 8,8
Power: 1,62 kW / 2,2 hp
Torque: 1,48 Nm
Power with tuned pipe: > 3,0 hp
Weight: 1425 g
incl. engine mount: 1515 g
and Silencer: 1.660 g
Fuel: 1:40 to 1:50 BelRay H1R / petrol

under request

Reviews

Quick Find

Shopping Cart

2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 250 mm (2 pcs)
2 x	20x1000 mm Ring Strap Back To Back
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 350 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	20x200 mm battery rings
1 x	SE Ring 450 mm (2 pcs)
2 x	Tape GFK 25 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 330 mm (4 pcs)
2 x	Nitroverdu 500 ml
1 x	Spray EC Red 400ml
1 x	Universal Colour Paste deep black 50 g
2 x	Parachute P4
2 x	Trike XL motor set (motor+esc+prop)
1 x	500 ml sealer (DOPE)
2 x	Paramotor BackPack XXS (without accessories)
1 x	Parachute PV6 for F3J
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x	Aramid 50 daN 50 m
1 x	Plasti Dip Liquid Tape 429 ml black
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	PARTALL® Hi-Temp Wax, 340 g
2 x	Windsock Ozone L -1200 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Para-RC Mix
1 x	Parachute BACKUP X100
1 x	Opale Rucksack
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	LASER 73" 1.85m (05) PILOT
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	"S" set for boats
1 x	Electric rocket starters (6 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x	Fox 4000 mm Airworld,canopy frame
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	ASK 21 6.5m + pylona
1 x	Fox MDM 1 4000 mm DeLuxe,cabina
1 x	Gobe R-26S (Airwold)
1 x	Fournier RF-4D
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Glider IKARUS
1 x	UHU hart 35 g
1 x	X-RAY Micro QR (Fuselage with canopy)
2 x	BABY glider (Aero-naut)
1 x	Spikes Band (5 m)
3 x	Jeti Black cap
1 x	10cm Flexible Stainless Steel Exhaust Tubing D=25mm
2 x	Spray Graphit 33
1 x	Spray YELLOW Inca Lexan 150ml
1 x
2 x	Hobbylite Filler, Balsa colour
1 x	Mini Infrared Thermomiter
1 x	Foreman, scale 1:32
1 x	Beech dowels 4.0 x 1000 mm
1 x	POLARON EX 800w charger
1 x	Manometer 4 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	MZ-10, 5 Channel HoTT
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	Blades 330mm
1 x	Spinner NUT M5
1 x	Spinner NUT M6
1 x	Wing OXY 5,0 m2
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Spinner NUT M8x1,25
1 x	Spinner NUT M10x1
1 x	Spinner NUT M6
1 x	Motor A50-12 L Glider
1 x	26x12 prop Super Silence
1 x	ZG231cc SHL
1 x	POWERBOX Magic Jeti Switch
1 x	BlueCom™ Adapter (Android / WP)
1 x	Power Box GPS Sensor III
1 x	DINO Glider ARC
1 x	BABY glider drawings (Aero-naut)
1 x	Glidder Mü13e (Bergfalke)
1 x	Glider STROLCH
1 x	Adaptadores carga 6s JST-XH
1 x	X-RAY Micro QR (Elevator)
1 x	Motor A50-14L Turnado V3 Glider
1 x	Motor A30-12 L V4
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Kit hydraulic brake
1 x	FOX 2.300 mm V2 PNP (FMS)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Motor Mega AC 16/15/04 COMBAT
1 x	Motor Mega AC 22/30/02
1 x	Motor Mega AC 16/07/06
1 x	Motor Mega AC 16/25/06
1 x	Combo RAY C3542-1000 + ESC 60A

16,179.41EUR