9.00EUR

13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2237]

13 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	SERVO HOLDER
1 x	Towing hook
3 x	Towing hook
1 x	Tow hook for tug
1 x	Fixed launching hook
1 x	5 mm Prop Adapter M8
2 x	3 mm Prop Adapter M6
1 x	SCHARNHORST accessories
2 x	3,2 mm Prop Adapter M6
2 x	2.3 mm Adapter for 30 mm spinners
1 x	10 mm Prop Adapter M12
1 x	5 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	3,2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
2 x	MG cannon 1.8 cm (5 pcs)
3 x	3.2 mm Prop Adapter M6
2 x	5 mm Prop Adapter M8
1 x	Aero-Master Fuselage (Aero-naut)
2 x	5 mm Prop Adapter M6
1 x	Horn 6/27 with M3 Bearing
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Softshell Hispano Aviación
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	12x8 tree blades propeller
1 x	29,0 mm propeller (left propeller)
1 x	10x7 tree blades propeller
2 x	Schul-Malpinsel Gr.5
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Transom 59x46 mm
1 x	Spinner black 36-38 mm
1 x	Blades 330mm
2 x	2,3 mm Prop Adapter M6
1 x	Ply-Span 450x600/13g Red
1 x	Ply-Span 450x600/13g Yellow
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Timon madera 45 mm
1 x	12x6 tree blades propeller
1 x	TWIST planeador gomas
1 x	Turbofan 2000 NG, rotor
1 x	15x7 tree blades propeller LEFT
1 x	290 mm M4/4 mm Prop shaft
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Z Spinner (CN) 30mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Tubo silicona transparente 7 x 3 mm (1m)
1 x	Porpeller HUNTER 400
1 x	14 mm Portholes for screws (10 pcs)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	3 mm Prop Adapter M6
1 x	4 mm Prop Adapter M8
1 x	4 mm Prop Adapter M6
1 x	Tail wheel for 8-12 kg models
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Socket head long ball link M3 (6 uds)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Long ball link M3 (6 uds)
1 x	Short ball link M2 (6 uds)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	ABS tube 7.0x5.0x1000 mm
1 x	28 mm tailwheel unit
1 x	LA500 cyclic central part
1 x	Bearing 3x6x2,5
1 x	Baal link 4/14/4 (5 pcs)
1 x	LA500 ciclic lever
1 x	LA500 Blades
1 x	LA500 pilot-seat set
2 x	Blade holder upper
1 x	Ball joint long
1 x	Cierva C30 Elevator
1 x	CAM-Carbon Light Prop 12x5" (Prop left)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	T-Motor U7-V2.0 Kv420
1 x	Spare white 38-45 mm spinner
1 x	Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x	Spinner 3BL propeller pleg. 40 mm / 6,0 mm
1 x	Size "L" motor holder for class 600
1 x	Size "M" motor holder for class 400
1 x	SCHARNHORST Battleship 1:200
1 x	Soporte con aro 17 mm (10 pcs)
1 x	LA500 pre-rotation gear hub
1 x	Head upper part
1 x	Blade holder center GFK 0,5 mm
1 x	LA500 nose
1 x	Motor rotor LA-500
1 x	Blade holder lower
1 x	Blade holder center
1 x	LA500 pre-rotation gear
1 x	Bearing housing
1 x	Baering 3x8x4
1 x	Rivette Ø 1,5 mm (50 pcs)
1 x	Propeller electric carbon 8.5x7
1 x	CAM-Carbon Light Prop 11x5" (Prop left)
1 x	BABY glider drawings (Aero-naut)
1 x	CAM-Carbon Light Prop 11x5" (Prop right)
1 x	CAM-Carbon Light Prop 12x5" (Prop right)
1 x	Rivette Ø 2,5 mm (50 pcs)
1 x	Propeller MASTER AIRSCREW 9x6
1 x	Propeller electric carbon 7x7
1 x	Cleat 20 mm (2 pcs)
1 x	Motor OS 55 AX
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support FUEL DOT V3
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Angle support XT60 conector
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Screw M3x16
1 x	Nut M2
1 x	Support GFK propeller ple. 2Bl
1 x	Motor OS FS 95 AX
1 x	Motor OS FS 75 AX
1 x	Piston ring for ZG 20 and G240RC
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm

3,354.50EUR