7.00EUR

20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2226]

20mm self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	Motor A2212/13T
4 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
2 x	Ball link Aluminio M3 (2 pcs)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
3 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
2 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
3 x	BALSA triangular 6x6x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
3 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Small pinned hinge (12 uds)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Short ball link M2 (6 uds)
1 x	1000 ml sealer (DOPE)
1 x	Silent-blocks DLE 170M
1 x	Gracia Maxi ARF (Top Model)
2 x	X-RAY Micro QR
1 x	Stickers-digit for marking
1 x	TAKEO 3.6m electric
1 x	Sliding window 1:2,4 / 1.2,6 Scale
2 x	X-RAY Micro QR (Tail Tube)
2 x	Chili Race F3K (aramid nose)
1 x	Electric spoiler 440 mm (2 pcs)
1 x	Chili F3K 2 wing servo mounted
2 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Threaded coupler M2 (10 uds)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
2 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x	Cable coupler M2,5 (2 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Yellow smoke canister 100 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	Red smoke canister 100 g
1 x	Smoke set "Glider"
1 x	Mini DART 2 F3K carbon light 1m Green
1 x	Q-12 2000 mm Electric
1 x	X-RAY Micro QR (Rudder)
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	X-RAY Micro QR (Elevator)
1 x	Gracia Maxi ARF, spare wings (Top Model)
1 x	Q-12 X-light 2000 mm Electric
1 x	Fox 4000 mm Airworld,cabina
1 x	KAVAN CA Activator 150ml
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Kwik link with arm M3xM2xL24
1 x	Wire easy tensioner (silver)
1 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Metal clevis M2 (10 uds)
1 x	Threaded coupler M2 (10 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Round Rod 1.0x3.5 cm
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Pulley brass 16/2 (2 pcs)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 11x8.5 Electric
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 10x3,8 SF
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Covered closure or fairings
1 x	27x10 prop Super Silence

5,762.22EUR