9.00EUR

13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2237]

13 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	100m servo "Premium" wire (white/red/blue)
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	50m servo "Premium" wire (white/red/blue)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	5 line servos wire black (1 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Foil for sticking flaps and ailerons
1 x
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
3 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 400 mm (2 pcs)
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector BEC female (10 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH male balance (4S) connector (2 pcs)
2 x	Connector CAN 15
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	2 mm female connector (2 pcs) with safety connector
2 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	SIMtransmitter 6 Mode 2
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	1/10 Pilot "Jack"
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	CC 02
1 x	Profile ABS half cane 5.0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Dumper propeller 6/8 mm
1 x	SCHARNHORST accessories
1 x	3,2 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	Aero-Master (Aero-naut)
1 x	3,2 mm Prop Adapter M6
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Cinta Goldfix 1m
1 x	SE Ring 360 mm (2 pcs)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Bag connector 2 mm
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x	Birch plywood plate 600x300x1.5 mm
1 x	XH female balance (7S) connector (2 pcs)
1 x	Conector JR Servo male (10 pcs)
2 x	Conector Servo female 4 pines
2 x	Conector JR Servo female (50 pcs)
1 x	Connectors MPX female
1 x	XH male balance (5S) connector (2 pcs)
1 x	Beech dowels 10 mm x 1000 mm
1 x	Switch moment button, 2 functions, long FUTABA
1 x	Futaba Radio Case
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Ply-Span 450x600/13g Orange
1 x	Oratex Red Fokker 10 m
1 x	Ply-Span 450x600/13g White
1 x	Selfstarr EME35
1 x	DLE 30 complete electronic ignition
1 x	Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	MR30 connector male
1 x	Gold antispark 4 mm plug
1 x	Gold antispark 5,5 mm plug
1 x	Conector JR Servo female (10 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector XT-30 (hembra)
1 x	Connectors banna oro 2 mm (M/F)
2 x	Conector JR Servo female (10 pcs)
1 x	XH female balance (8S) connector (2 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	XH male balance (8S) connector (2 pcs)
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	XH female balance (9S) connector (2 pcs)
1 x	VIPER SL Thunderbird PNP 2270 mm
1 x	PC-21 2.880 mm RED
1 x	Boeing (TX) T-7A RED HAWK
1 x	Campana Ms 14 mm (5 pcs)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	FELIX JR Red/Yellow 1750 mm
1 x	PC-21 2.880 mm (w/o oracover)
1 x	VIPER SL YELLOW PNP 2270 mm
1 x	PC-21 2.880 mm WHITE/RED
1 x	JMB-Jets K8 Trainer Jet PNP 2050 mm
1 x	VIPER SL Gold PNP 2270 mm
1 x	PC-21 2880 mm Spinner 5Blade blue
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	MB339 Freece PNP 1790 mm
1 x	50N turbine start protection tube
1 x	CAM-Carbon Light Prop 13x6" (Prop right)
1 x	Capstan of plastic 125x72x45 mm
1 x	Canadair CL-415 (aero-naut)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Cabestrante plastico 5x6 mm (10 pcs)
1 x	Brass wire 0.30 mm (25 m)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	CAM-Carbon Light Prop 12x6"
1 x	30cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	CAM-Carbon Light Prop 11x7"
1 x	Aqua RACE 70 (without motor)
1 x	Boat 82 mm
1 x	BOX-Setup Actro-marine
1 x	Boat vents 10mm (2pcs)
1 x	BABY glider (Aero-naut)
1 x	BLOCK m.Ose Ms vern 12
1 x	Bocina 30 mm (1 pcs)
1 x	3-blades 28x12 carbon prop Super Silence
1 x	27x10 prop Super Silence
1 x	60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x
1 x	24x12 prop Super Silence

30,174.97EUR