0.00EUR

8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2238]

8 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

2 x	Jeti Black cap
2 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Tube Pitot to PIXHAWK
2 x	PPM Encoder Module
2 x	Horn with ball 40x30
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	20 mm carbon horn
1 x	Cable with accesories
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn 5/15 with M2 Bearing
2 x	6 mm red aluminium threaded horn with patella
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Horn for flap control (1 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn with ball 55x40
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
3 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	Adjustable launching hook
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Spray YELLOW Inca Lexan 150ml
2 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste deep black 50 g
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Towing hook
1 x	Nitroverdu 500 ml
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x
1 x	Universal Colour Paste deep black 250 g
1 x	Towing hook <3m
1 x	Paint gun for sprays
1 x	1000 ml sealer (DOPE)
1 x	Spannlack 1000 ml
2 x	Spray adhesive AEROFIX 2
1 x	Release wax 250ml
1 x	LOWER TOW HOOK
2 x	Tow hook for tug
1 x	Universal Colour Paste white 50 g
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	500 ml sealer (DOPE)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Premium servo extension 50cm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
2 x	Horn DU-BRO 1/2 (2 pcs)
1 x	6 mm M3 variable inclined horn
1 x	5 mm M2 variable horn
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Cable control set
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Indoor hinge with servo arm integraded
1 x	Horn DUBRO 1/2A
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Extra long horn 60x30
2 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Rudder forward 80x28 "type Kato"
1 x	Adjustable brass horn threaded M3
1 x	6 mm aluminium horn with patella
1 x	Micro control horn T2 Ø 1
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	UHU hart 35 g
1 x	Round Rod 3,0x1000 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Ply-Span 450x600/13g White
1 x	VTX 477 Carbon Rotorblade
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 4,0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
3 x	Extinguisher CO2 - 2 Kg
1 x	Hobbylite Filler, Balsa colour
1 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Spring clamp for tube Ø50 mm
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	LENTUS Multiplex Fundas alas
1 x	Fixed launching hook
1 x	Módulo Bluetooth
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	Blade holder metal LAMA
1 x	PIX Hawk with accesories
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	RH long aluminium horn (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	SlowFlyer control horn (3 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	290x4 mm M4 shaft ship
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Strip 1,5x1,5x330 mm
1 x	Round Rod 5,0x1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)

3,261.81EUR