9.00EUR

10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2235]

10 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.

under request

Reviews

Quick Find

Shopping Cart

2 x	Blue smoke canister 100 g
1 x	AX-60 starters (5 pcs)
3 x	Red smoke canister 65 g
2 x	White smoke canister 140 g
1 x	Remote electric ignition system
2 x	Electric rocket starters (6 pcs)
3 x	B4-0 rocket charges (6 pcs)
2 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Green smoke canister 140 g
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	PCARD Wireless System
2 x	Red smoke canister 140 g
1 x	Ventral support for AX-18/AX-60
4 x	Blue smoke canister 140 g
2 x	Parachutist
3 x	3l Smoke oil
4 x	White smoke canister 100 g
2 x	AX-60 starters (5 pcs)
2 x	Green smoke canister 65 g
4 x	White smoke bombs AX-60 (5 pcs)
1 x	Yellow smoke canister 140 g
2 x	"M" set
3 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	EasyFLY Addon
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Small Crow DLE-170M
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Profile ABS Square 2 x 1000 mm
3 x	Profile ABS half cane 3x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
2 x	U Profile ABS 2,0x4,0x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
3 x	Carbon fiber rod 1.5 mm x 1000 mm
3 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
2 x	U Profile ABS 1,0x2,0x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
3 x	ABS angle 3,0x3,0x1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	L-Connector 1.0 mm x 1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Screw-lock connector M2 (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Smoke set "Glider"
1 x	Tube support Ø 6mm (10 pcs)
2 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	Wings Bags JEEMO
1 x	Quick hose connector 4-4 mm
1 x	Fail Safe air retract
2 x	"S" set for planes
1 x	ASW 15 5000 mm (Airwold)
1 x	Fox 4000 mm Airworld,canopy frame
1 x	Quick hose connector 3-3 mm
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	Nylon gear block Ø 6 mm (2 uds)
3 x	White smoke bombs AX-18 (5 pcs)
1 x	LO 100 ARC 3.3m,cabina
1 x	Aero shocks
1 x	Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x	Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x	Angled clevis with threaded rod M3
1 x	IMPULSE 2 F3F
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	SIMtransmitter 6 Mode 2
1 x	Motor DLE 430 cc - Paramotors
1 x	Motor DLE 170 M- Paramotors
1 x	Interface Realflight Simulator
1 x	Red smoke canister 100 g
2 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	O-ring Saito FG-73 5cyl
1 x	Sparkplug 1/4-32
1 x	Propadapter for motor A50-V3
1 x	Small flex hinge (12 uds)
2 x	ABS angle 5,0x5,0x1000 mm
2 x	FESTO connector M7 barb fitting XL Tygon
1 x	25 mm reinforced hinge
1 x	Profile ABS half cane 4x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Indoor hinge with servo arm integraded
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Y-Hose connector 4-4-4mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Round flex hinge (12 uds)
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Distanzstück motor OS 120 AX
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 30 cm female (Graupner)
1 x	Premium servo extension 50cm
1 x	Premium servo extension 100cm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension silicon 100 cm (Futaba)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	Parachute XTRALITE S
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension 15 cm (Futaba)
1 x	Ventus 1:4 set of instruments
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Propeller diller for DLE170
1 x	Suction funnel for carburetor 90D-M (red)
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Extension Arm for Carburetor (red)
1 x	15 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	1000 ccm gasoline fuel tank
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	1000 cc gasoline fuel tank complet
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Tacometer mini ignition RCEXL
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Extension silicon 35 cm male (Futaba)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	KAVAN Hand crank fuel pump
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	VBar NEO VLink 6.x Express, neon-yellow
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support pump Xicoy X45
1 x	Angle support XT60 conector
1 x	Support FUEL DOT V3
1 x	Y-Hose connector 6-6-6 mm
1 x	Propeller electric carbon 9.5x5
1 x	Propeller POWER-PROP 16x10
1 x	Dumper propeller 6/8 mm
1 x	Propeller electric carbon 6x5
1 x	Fuselage Bags JEEMO
1 x	Support Filtro FESTO
1 x	Support XT60 conector (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Yellow smoke canister 100 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	FOX ARF 2000 mm Red (Hacker Model)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	Support Pitot JETI
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Initior Transmitter FTX2 Wireless
1 x	T-Hose connector 4-4-4mm
1 x	Y-Hose connector 4mm
1 x	Tap FESTO 6-6 mm
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Tap FESTO 4-4 mm
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	T-Hose connector 3-3-3 mm
1 x	Racor 4/6 mm
1 x	Racor 3/3 mm
1 x	Propeller POWER-PROP 7x7
1 x	Z-shaped servo mount
1 x	Racor "Y" 3 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	T-Hose connector 3-3-3 mm
1 x	T-Hose connector 6-6-6 mm
1 x	Racor 4/4 mm
1 x	T-Hose connector 2-2-2 mm
1 x	Racor 2/3 mm
1 x	Y-Hose connector 3-3-3 mm
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Propeller POWER-PROP 12x8
1 x	Propeller electric carbon 10.5x7
1 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 11x9
1 x	Propeller electric carbon 10x6
1 x	White smoke bombs AX-9 (10 pcs)
1 x	White smoke canister 65 g
1 x	Propeller POWER-PROP 14x9
1 x	Propeller electric carbon 10.5x8
1 x	Green smoke canister 100 g
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Propeller hub spacer 8/5.5
1 x	Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Support 45% Hopper JetsMunt
2 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Fuel Dot (Silver)
1 x	GLOW 9C + accesories
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Sparkplug NGK CM6
1 x	Propeller diller for DA50, DLE55 red
1 x	Tubo silicona transparente 7 x 3 mm (1m)
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Fuel Fittings-Gold
1 x	diameter silicone tube for glow
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Hose stopper 4 mm
1 x	Sparkplug Saito 400
1 x	Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180
1 x	FESTO connector M7 barb fitting 6mm
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	TX 250 mW especial GOPRO
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	Turbo light spinner cap white 32mm
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x	Fuel Fittings-Blue
1 x	Quick hose connector 4-3 mm
1 x	Quick hose connector 3-3 mm
1 x	Fuel Fittings-Red
1 x	FESTO connector M7 Quick 6 mm
1 x	Deposito DUBRO 360 ml - 12 oz
1 x	Covered closure or fairings
1 x	Fuel station 10L no include pump electric
1 x	Piston ring for DA-60 and DA-120
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	FESTO Filter 6 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Motor Mount for TITAN ZG45 and ZG62, length 72 mm

20,228.62EUR