7.00EUR

13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2223]


13 mm Self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x Parachute BACKUP X100
1 x Parachute PV6 for F3J
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Adaptadores carga 6s JST-XH
1 x SE Ring 360 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Ring 320 mm length (5 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 450 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Marker ties (20 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Turbina KINGTECH K320 G5
1 x SE Ring 300 mm (2 pcs)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x SE Ring 240 mm (2 pcs)
1 x 20x200 mm battery rings
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Crimping tool
1 x 
2 x SE Ring 480 mm (2 pcs)
1 x Extension MPX-MPX 20 cm
1 x Tape GFK 50 mm
1 x Cinta Goldfix 1m
1 x SE Ring 350 mm (2 pcs)
1 x Tape GFK 38 mm
1 x SE Ring 400 mm (2 pcs)
1 x Softshell Hispano Aviación
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 140 mm rods + T patellas set for direction control
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Allen wheel collar M4x4
2 x 80 mm rods set for direction control
1 x 45 mm rods set for direction control
1 x Cable grommet Ø 5 mm (4 uds)
1 x Allen wheel collar M3x3
1 x Cable tie mounts 4.3 (4 uds)
1 x Clip fixing for wing (2 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Cable grommet 9.5 mm (4 uds)
1 x Cap Hispano Aviación
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Canopy Latch
1 x Allen wheel collar M4x6
1 x 250 mm / 16 mm Airbrakes
1 x Vest clothes Hispano Aviación
1 x 45 mm rods + T patellas set for direction control
1 x Cabin latch Fox MDM1 4m (pair)
1 x Allen wheel collar M3x5
1 x Cap closure 33/23.5mm (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Spinner NUT M6
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x Spray adhesive AEROFIX 2
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Partall paste 650 g
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Universal Colour Paste white 50 g
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Aluminium sheet 500x250x0,5mm
1 x Nitroverdu 500 ml
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 1000 ml sealer (DOPE)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x 20 g tin paste
1 x Buy Perforated film 100 cm / 10 m
1 x Buy Perforated film 145 cm / 50 m
1 x Spannlack 1000 ml
1 x ABS 500 x 400 x 1 mm (white)
1 x Buy Perforated film 100 cm / 20 m
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Universal Colour Paste deep black 250 g
1 x Hobbylite Filler, Balsa colour
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
2 x Profile ABS Square 4 x 1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Rubber profile 6-2 mm 2M
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS half cane 7.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Profile ABS half cane 3x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x Motor A2212/13T
1 x Profile ABS Square 3 x 1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Cable Cargador FUTABA
1 x Ball Link Plier
1 x Propeller diller for DLE111 and DA85-150
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x 2 mm Prop Adapter M6
1 x Variable Flow Smoke Pump System
1 x 31,0 mm propeller (rigth propeller)
1 x FESTO connector M7 barb fitting 6mm
1 x 1000 cc gasoline fuel tank complet
1 x Fuel tank 1500ml (50oz)
1 x Electric Fuel Pump 12v
1 x 15x7 tree blades propeller
1 x Y-Hose connector 4-4-4mm
1 x PowerBox Smokepump JETs 2x outside
1 x 290 mm 8x4 M4 shaft ship
1 x 10x7 tree blades propeller
1 x 15x7 tree blades propeller LEFT
1 x Quick hose connector 3-3 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Electric Fuel Pump 12V
1 x 12 mm mast holder
1 x 2,3 mm Prop Adapter M6
1 x T-Hose connector 3-3-3 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x KAVAN Hand crank fuel pump
1 x 12x6 tree blades propeller
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Spikes Band (5 m)
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Spinner NUT M6
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Fiberglass 25 g/m² 5000x1270 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x 500 ml sealer (DOPE)
1 x Carbon plate 550x350x1.0 mm ECOTECH
1 x Chopped glass fibre strands 3 mm
1 x Carbon plate 350x150x0.5 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Vacuum bag, 1200 mm x 50 m
1 x Profile ABS Square 2 x 1000 mm
1 x Paint gun for sprays
1 x Presto SF Light Filler styrene-free (420 g)
1 x ABS angle 2,0x2,0x1000 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Universal Colour Paste deep black 50 g
1 x Lock nut aluminium M2 (4 pcs)
1 x Nylon Screw M4x20
1 x Extension silicon 100 cm (Graupner)
1 x Extension 100 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 75 cm (Graupner)
1 x Extension silicon 35 cm (Futaba)
1 x 30cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 3-blades 16x10 carbon prop Super Silence
1 x 3-blades 30x12 carbon prop Super Silence
1 x 1000 ccm gasoline fuel tank
1 x SERVO HOLDER
1 x 100g Flux Paste for Silver Solder
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 
1 x 3,9 mm ZG20-ZG38 servo arm
1 x 55% silver electrodes (2 pcs)
1 x GameCommander USB Universal
11,082.89EUR
Manufacturers
Manufacturer Info
Toni Clark
Toni Clark Homepage
Other products
Languages
Español English
Currencies