119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Crystal TX 35.150 Ch 75
1 x	ABS tube 3.0x2.0x330 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Extension silicon 30 cm female (Futaba)
2 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	BETA 1400 RTF Red
1 x	Concave-Convex sandpaper file 13 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
2 x	Xplorer4 anemometro
1 x	Debonder CA 20g
1 x	Oracover GREY Seafire Sea 2m
1 x	Cable coupler M2 (10 uds)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Ball Link Plier
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	25 mm Sandpaper file
1 x	Oracover White 10 m
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	M3 Maxi ball link (2 uds)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Gold antispark 5,5 mm plug
1 x	Short ball link M1.6 (6 uds)
1 x	XH female balance (4S) connector (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Ball link M3 RPA's-UAV's
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Socket head ball link M3 (2 uds)
1 x	Large flex hinge (12 uds)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Optical RPM Sensor
1 x	EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG
1 x	Angle of incidence meter
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle measurer
1 x	Yellow silicone 0,5 qmm wire (50 m)
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	Silicone red 6,0 qmm wire (25 m)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	Suncover 100cc Red
1 x	Tail tube RAINBOW
1 x	LA500 housing-lower cyclic
1 x	LA500 front gear holder
1 x	Fuel bottle 500 ccm
1 x	Dust collector for mould cleaning
1 x	Glow starter with charger 230v
1 x	Extension 15 cm (Futaba)
1 x	Motor OS 3820-1200 electric
1 x	Connector CAN 15
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Handle for PERMAGRIT lime
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Electric Fuel Pump 12v
1 x	Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x	Metal clevis M2 (10 uds)
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Lipo KAVAN 2200 mAh 11.1v 40/80C
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Xplorer1 anemometro
1 x	Xplorer2 anemometro
1 x	Xplorer3 anemometro
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	XT-60 connector (female)
1 x	XH male balance (5S) connector (2 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors DEANS (T)
1 x	XH female balance (8S) connector (2 pcs)
1 x	XH male balance (8S) connector (2 pcs)
1 x	XH female balance (9S) connector (2 pcs)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Conector XT-30 (hembra)
1 x	Connectors banna oro 2 mm (M/F)
1 x	XH male balance (4S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Hardener P-25, canister 2.5Kg
1 x	Mould Resin P 10 kg
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	BEC 3A FOXY
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	5 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	2 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	LA500 cyclic central part
2 x	Birch plywood plate 600x300x1.5 mm
2 x	Pegamento Pu R 50g polyuretano
2 x	Superlight deluxe wheel 75 mm (2 pcs)
2 x	M3 Maxi ball link (2 uds)
2 x	Birch plywood plate 600x300x1.2 mm
2 x	Superlight deluxe wheel 62 mm (2 pcs)
1 x	Superlight wheel 100 mm with valve (2 pcs)
1 x	Copier 2x20 cm pcs
1 x	XT60 Connector with Holder Male 2pcs
1 x	Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x
1 x	SlowFlyer control horn (3 pcs)
1 x	Spinner 82mm Black ventilado
1 x	Dummy motor GPW Wasp Scale 1/4
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x
1 x	Green smoke canister 140 g
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	A60 Motor Mount Alu complete set
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Battery charging cable XT60

5,367.96EUR