53.90EUR

OPTOTRONIX Aurora LCU
[EMCOPT2000]


Product description:
The Optotronix Aurora LCU is the follow-up of the established ACL ProControl. With a wide range of functions and intelligent firmware it sets new standards for R/C flight lighting. With dimensions of only 40 x 15 mm (1.57 x 0.59 in) and a weight of only 12g (0.42oz) the new lighting electronic brings the following features: - More outputs - more power 6 outputs with output power of up to 1.5A each for more power in R/C lighting.
- Light weight: The Optotronix Aurora LCU not only is small and leight weight - now it also can be used with 1 cell lithium polymer (1S-LiPo) or one cell LiFe batteries. Due to that fact lighting systems with slightest weight are realizable.
- Easy operating: A easy to use button as well as 7 status LEDs ensure an easy, fast and direct operating.
- Flexible and intelligent: Activation moment and function can be programmed for each output - easily via button. Furthermore Optotronix Aurora LCU fits itself to the used remote control and spares programming work.
- Enormous lighting functions: Numerous flash sequences and dimming effects are available. Even the desired moment for the flashes can be selected.
     - 7 different flash sequences with each three different moments selectable.
     - 2 beacon effects (for simulating rotating beacon).
- Now also afterburner simulation Furthermore the controlling of LEDs and afterburner rings with six different, true to original, randomly generated afterburner effects is possible. Different start modes (ignition behavior) are selectable. So every jet, doesn't matter if small fun model or large scale model, can be enhanced with the appropriate afterburner effect.
     - 7 different afterburner effects for impeller and turbine models
     - Randomly generated flicker behavour
     - Different start modes: glowing, backfire, multiple backfire
     - Operating of individual LEDs, afterburner rings
- Stand alone: At the push of a button standalone mode can be activated - the selected outputs stay active even without receiver signal - perfect for exibitions or ratings.
- Battery surveillance: The status of the battery can be requested in six steps. When critical battery voltage a warning occurs and the LCU switches off. When battery not seperated from the electronic the lighting will be switched off.
- Maximum safety: Electric consumers that are not receiver related, shouldn't be connected to it. So the Optotronix Aurora LCU has a galvanic isolation (opto-coupler).
- Easy installation: As accessory the Aurora Plug (Item no. OPT2010) is available. Aurora Plug is a plug strip with gold plated contacts, which simplifies and precipitates soldering of the lighting.

Specifications:
- Number of outputs: 6
- Max. current per output: 1.5 A
- Operating voltage: 3.1 - 8.2 V (1S/2S LiPo, 1S/2S LiFe, 3S/4S/5S NiMh)
- Flash sequences: 21
- Beacon effects: 2
- Afterburner effects: 7
- Updatable: Yes
- Stand alone mode: Yes
- Dimensions: 40x15 mm (1.57x0.59 in)
- Weight: 12 g (0.42 oz)





temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
2 x Profile ABS Square 1 x 1000 mm
3 x Profile ABS half cane 2.5x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Pine wood slat 10x10x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
2 x Round Rod 1,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
3 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
1 x Round Rod 4,0x1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
3 x Round Rod 2,0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x ABS Strip 1.0x4.0x1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 1,25x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
3 x Round Rod 5,0x1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Strip ABS 2.0x8.0x1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Strip 2,5x1,25x330 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
2 x Round Rod 6,0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Long ball link M2 (6 uds)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Angle of incidence meter
1 x Horn 6/35 with M3 Bearing
1 x Remote electric ignition system
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x BALSA leading edge 8x10x1000 mm
1 x Combustible Glow "KAVAN" air/heli 5% nitro
2 x ABS Strip 1.0x5.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 6.0x1000 mm
2 x Profile ABS Square 4 x 1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
2 x ABS rectangular profile 12x6.0x1000 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Kit hydraulic brake
1 x Balsa panel 8.0x100x1000 mm
1 x Motor OS 3820-1200 electric
1 x Balsa panel 4.0x100x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x 140 mm rods + T patellas set for direction control
1 x Snap for floding prop for 2 mm axi
1 x 90 mm rods + T patellas set for direction control
1 x 80 mm rods set for direction control
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x 45 mm rods set for direction control
1 x Snap long M2 (10 uds)
1 x Cockpit metalic closing
1 x White smoke canister 140 g
1 x AX-60 starters (5 pcs)
1 x White smoke canister 65 g
1 x Blue smoke canister 100 g
1 x Yellow smoke canister 100 g
1 x Electric rocket starters (6 pcs)
1 x Birch plywood plate 600x300x4.0 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Sprung retractable undercarriage (Alfa model)
1 x Birch plywood plate 600x300x4.0 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Propeller CFK 15x13
1 x Propeller RF CFK 13x6.5
1 x Propeller RF CFK 10x17
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Propeller CFK 14x7
1 x Propeller CFK 18x9
1 x Propeller CFK 15.5x10
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
3 x Propeller CFK 14x8
1 x Propeller CFK 14x8 Slim
2 x Propeller CFK 18x17
1 x EDGE 540-A 91" (2310 mm)
1 x LASER 73" 1.85m (05) PILOT
3 x Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
2 x Propeller CFK 18x16
1 x Propeller CFK 18x19
1 x Propeller CFK 20x13
1 x Propeller CFK 13x7.5
3 x Propeller CFK 12.5x6.5
2 x Propeller CFK 12X6
3 x EDGE 540-A 74" (1880 mm)
1 x FIALA Propeller 23x8 Electric
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Round Rod 3,0x1000 mm
1 x Body for landing gear Ø 3 mm
1 x Quick hose connector 4-4 mm
1 x Servo arm with 5 mm hole to FEMA 9810A
1 x Check valve quick hose connector 4-4 mm
1 x Y-Hose connector 2-2-2 mm
1 x Fail Safe air retract
1 x Body for landing gear Ø 4 mm
1 x Wheel collar 2 mm Ø (4 uds)
1 x T-Hose connector 3-3-3 mm
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x 100g Flux Paste for Silver Solder
1 x 27x10 prop Super Silence
1 x Cables suitable for the motor AC 28/7
1 x Axi for MVVS 3.5 Sport
1 x Xplorer3 anemometro
1 x Motor Mega AC 16/15/04
1 x BALSA trip 2.0x10.0x1000 mm
1 x KIRA 480-31 5,2:1
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x PYRO 750-50L Competition
1 x 3,0x60 mm allen screwdriver
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 3 LiPo XH>EH adapter
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Profile ABS half cane 8.0x1000 mm
1 x 20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 24x12 prop Super Silence
1 x 28x12 prop Super Silence
1 x 290 mm M4 7/8x212 mm shaft ship
1 x Electric coversion set
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Motor Mega AC 16/25/03
1 x Motor Mega AC 16/25/02
1 x Motor Mega AC 16/15/08
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x KIRA 600-16
1 x KIRA 400-27
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x KIRA 480-34
1 x KIRA 600-20
1 x 460 mm EPP Floats
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 2,5x60 mm allen screwdriver
1 x 1,2x1000 mm 2:1 black termoretract tube
2 x Vess propeller 13x6 S
1 x Propeller MASTER 6x3
1 x Propeller MASTER AIRSCREW 13x6
1 x Propeller VESS 27A
1 x EXTRA 300 78" V3 Orange/Blue
1 x Crystal RX 35.020 Ch 62
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 15x16
1 x SkyMaxx 1.550 mm (kit)
1 x Propeller MENZ-S 18x6
1 x 1,5x50 mm allen screwdriver
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Propeller POWER-PROP 14x10
1 x Propeller POWER-PROP 16x10
1 x Propeller POWER-PROP 15x10
1 x Propeller VESS 32A
1 x Propeller MASTER 6x3,5
1 x 10x7 tree blades propeller
1 x Propeller MASTER AIRSCREW 9x6
1 x 8x6 tree blades propeller
1 x Propeller MASTER AIRSCREW 12x8
1 x Vess propeller 11x7 S
1 x Propeller POWER-PROP 11x8
1 x Propeller MASTER 6x4
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Optotronix Aurora Plug
1 x Micro Crystal RX 35.080 Ch 68
1 x Micro Crystal RX 35.140 Ch 74
1 x TX 250 mW especial GOPRO
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Propeller CFK 17x13
1 x Propeller MENZ-S 19x8
1 x Propeller MENZ-S 16x8 3-Blades
1 x Propeller MENZ-S 20x9
1 x Propeller CFK 18,5x12
1 x Propeller MENZ-S 16x10
1 x Propeller MENZ-S 21x10
1 x Propeller MASTER 7x5
1 x BATTWIN BATTERY REDUNDANCY SYSTEM
1 x Propeller POWER-PROP 12x8
1 x 6x4 tree blades propeller
1 x Propeller POWER-PROP 11x9
1 x Propeller MASTER 7x4
1 x 9x7 tree blades propeller
1 x Propeller MASTER 5,5x4
1 x Helice CLASSIC-Prop 20x10
1 x 12x6 tree blades propeller
1 x MASTER 16x10 tree blades propeller
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Tailwheel for 40/90 size
1 x Propeller MASTER 7x6
1 x Propeller POWER-PROP 14x8
1 x Propeller MASTER AIRSCREW 9x6
1 x EWC3 40 cm wing connector
1 x DPSI Micro - RCS
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
16,709.67EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies