119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Optical RPM Sensor
1 x	DYNAMOMETER S-1580
2 x	Oracover White 10 m
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	USB HLS prog. interface
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Ply-Span 450x600/13g Red
3 x	Monokote PLATINO metalizado (1.8x0.65m)
3 x	3 LiPo XH>EH adapter
2 x	Oratex Natural White 2m
2 x	Ply-Span 450x600/13g Yellow
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	BEC 3A FOXY
1 x	Oracover ROYAL RED 2m
2 x	JETImodel SINGLE BEC
1 x	Oracover CARBON Metalic 1 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover Azul 2 m
3 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Oracover Red 2 m
2 x	Ply-Span 450x600/13g White
3 x	CC 01
3 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Oracover Yellow CADMIO 2 m
1 x	Oracover Yellow CADMIO 10 m
2 x	CC 05
2 x	CC 02
2 x	Oratex Red Fokker 10 m
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	ORACOVER transparent Yellow (10 m)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	M3 black washers (4 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
2 x	Propeller balancer
1 x	Medidor ángulos y/o incidencias
3 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand SebArt
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Cable with accesories
1 x	XH female balance (3S) connector (2 pcs)
1 x	Hot Glue Stick BLACK
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	CC 03
2 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC lilac battery termo-retract 70 mm (10 m)
2 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	PVC transparent battery termo-retract 70 mm (10 m)
2 x	APM2.6 Power module with 5.3V DC BEC
2 x	Adapter lead MPX/XT60
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	2,4x1000 mm 2:1 red termoretract tube
3 x	30 cm BEC cable (male)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	Solarfilm Lite blue transp. 5m
1 x	2,4x1000 mm 2:1 black termoretract tube
2 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Blades 330mm
2 x	Aro pasacable Ø25 mm (4 pcs)
2 x	2 LiPo XH>EH adapter
1 x	Angle support XT60 conector
1 x	Connector CAN 15
2 x	TrainerCord (master-learner)
1 x	Male connector for 12 pines AWG
1 x	Male connector for 10 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Axle wheel with accesories
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Surface Indicator Gauge Small
1 x	Propeller balancer
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Extension 5 lipos JST/C
1 x	Magnetic Interruptor MULTIPLEX
1 x	MAX BEC 2D plus EX
1 x	Interruptor SPS 70v 60/120A
1 x	Oracover Orange 2 m
1 x	DPSI magnetic switch actuator (housing)
1 x	PSC 6
1 x	MAX BEC
1 x	SPS Remote switch actuator
1 x	Oracover light Grey 2m
1 x	Oracover Verde 2 m
1 x	Multi-adapter balancer JST - TP
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	PSC 5
1 x	Extension 5 lipos JST - JST/C
1 x	Long Switch On/Off micro
1 x	Oracover Black 2 m
2 x	Oratex Antik 2m
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Oracover White 2 m
1 x	Multi-adapter balancer JST/C - TP
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Extension 15 cm (Futaba)
1 x	200 mm extensión servo HITEC/JR
1 x	Adapter lead MPX/EC3
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Battery charging cable XT60
1 x	USB interface ALTIS
1 x	Oratex Yellow Cub 10 m
1 x	Oracover Yellow CUB 2 m
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	PVC red battery termo-retract 68 mm (10 m)
2 x	Monokote BLANCO jet (1.8x0.65m)
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Premium servo extension 100cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension 7.5 cm
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Premium servo extension 75cm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 90 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	Fueling valve "Air"
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
2 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	LUNAK 4,00 m
1 x	PPM Encoder Module
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Heat sink for Optotronix LEDs
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	Filter Capacitor JR
1 x	Adapter 4,0 mm M6
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 4,0 mm M8
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
2 x	Set freno para ruedas Dia. 127 mm
1 x	Mudguard wheels 112/127 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Cabel "Y" 30 cm (graupner)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
2 x	AXI 2204 Multicopter
1 x	Ventus 1:4 set of instruments
2 x	1804 2400KV Brushless Motor Qav 250 mini
2 x	ESC ALPHA 60A HV
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Hovercraft sailcloth

7,866.47EUR