16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Quick Find

Shopping Cart

1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Prolongador S-Bus JR/JR 10cm
2 x	MPX Sub-D Adaptor
1 x	Premium servo extension 100cm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Extension 7.5 cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension 30 cm (Futaba)
1 x	Extension lead 15 cm Multiplex
1 x	Extension 90 cm (Futaba)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 3,5 mm (M/F)
2 x	Vasa model Catapult
1 x	Vacuum pump 12 CFM
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	EasyFLY Addon
1 x	Nut for mounting M4 (4 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Extension silicon 25 cm (Futaba)
1 x	Lock nut M4 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Blind nut M3 (4 pcs)
2 x	Blind nut M4 (4 pcs)
2 x	Lock nut M5 (20 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
2 x	Hexagonal Nut M4 (10 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Extension silicon 75 cm (Futaba)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Threaded insert M6 (10 pcs)
2 x	Threaded insert M5 (10 pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Strip 2,5x1,25x330 mm
1 x	TMM 1210-3S heli
1 x	TMM 2512-3S heli
1 x	Esc KOSMIK 200+ HV
1 x	Long ball link M2 (6 uds)
1 x	JIVE 80+LV Esc
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	JIVE 120+HV Esc
1 x	Mini-Pix Esc 15 Amp
1 x	KOLIBRI 140 LV Esc
1 x	KOBY 70 LV Esc
1 x	KOBY 90 LV Esc
1 x	M3 Maxi ball link (2 uds)
1 x	JIVE 80+HV Esc
1 x	Esc KOSMIK 210 HV-I COOL
1 x	JIVE 100+LV Esc
1 x	ESC KOLIBRI 140 HV-I
1 x	Propeller diller for EME35 and DLE35
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	SAVOX SH 1290 MG servo digi
1 x	4 LiPo XH>EH adapter
1 x	12.7 mm 2:1 black termoretract tube
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Socket Head Screw M2x10
1 x	Servo HITEC D145 SW
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	USB Charger 120-240V AC
1 x	Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x	Motor Scorpion HKIII 4035-560 Kv
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Round Rod 1,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Propeller POWER-PROP 14x10
1 x	DPSI LR-S (with push buttons)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	DPSI RV Mini 6 (2008)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	EWC3 100 cm wing connector
1 x	Socket Head Screw M2x5
1 x	OPTOTRONIX Aurora LCU
1 x	Connectors DEANS (T) micro
1 x	Servoarm Aluminium SH-82
1 x	Filter Capacitor JR
1 x	EWC3 40 cm wing connector
1 x	Socket Head Screw M2x8
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)

7,162.78EUR