119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	SIMtransmitter 6 Mode 2
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	RF9 Flight Simulator with Spektrum Controller
3 x	L-Connector 4.0 mm x 1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	ABS angle 5,0x5,0x1000 mm
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
3 x	L-Connector 1.0 mm x 1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
3 x	Profile ABS half cane 3x1000 mm
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	U Profile ABS 1,0x2,0x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
2 x	ABS angle 6,0x6,0x1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
3 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Steering arm 12 mm Ø 4 mm
2 x	Cap closure 33/23.5mm (2 uds)
1 x	One touch canopy lock
1 x	Canopy Latch
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Glases Innovation Plus
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
3 x	Glases Aspen
1 x	Vasa model Catapult
1 x	800TVL CMOS camera for FPV
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	USB Interface Adapter
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Combo lighting module with covering drop shape
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Resistor 3W 5% OR82
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Profile ABS half cane 7.0x1000 mm
2 x	ABS angle 10,0x10,0x1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Glases Nimbus "Black"
1 x	100 mm rods + T patellas set for direction control
1 x	45 mm rods set for direction control
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cockpit aluminium closing 5.4g
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Snap short M2 (10 uds)
1 x	Glases Stratus
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	100 mm rods set for direction control
1 x	Hose stopper 4 mm
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Neumatic retractable landing gear (Aero-Naut)
1 x	Faucet FESTO
1 x	Nylon threaded block M6 (2 uds)
1 x	Nylon threaded block M5 (2 uds)
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Small aluminium horn gold (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Cable coupler M2 (10 uds)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Socket head ball link M3 (2 uds)
1 x	Short ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 RPA's-UAV's
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Ball link M3 (6 uds)
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Mini neumatic retract landing gear
1 x	Festo 4mm Tubing Holder (10 uds)
1 x	PRO-HV Dual Action Valve
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x
1 x	2,3 mm Prop Adapter M5
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Small control horn with bearing (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Small aluminium horn blue (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	DPSI Ampere battery backer
1 x	DPSI 2001 RV
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	290x4 mm M4 shaft ship
1 x	NF-3XL set
1 x	Landing lights 18 mm (0.71in)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI OCP Overload protection
1 x	PowerFuel RX V2 Fuel Pump

3,432.56EUR