Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	Xplorer4 anemometro
1 x	Xplorer2 anemometro
2 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 18.0x16.0x1000 mm
3 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Vasa model Catapult
1 x	Horn 6/27 with M3 Bearing
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn for flap control (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Horn 5/10 with M2 Bearing
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Small aluminium horn gold (2pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Cable with accesories
3 x	Small aluminium horn blue (2pcs)
2 x	Horn with ball 55x40
1 x	6 mm aluminium horn with patella
1 x	Horn 6/35 with M3 Bearing
2 x	6 mm blue aluminium threaded horn with patella
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Hot Glue Stick GREEN
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Opale Rucksack
1 x	Ball link M2 (10 pcs)
1 x
1 x	1/6 Pilot "Cindy"
1 x	1/10 Pilot "Jimmy"
1 x	Xplorer3 anemometro
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
2 x	Power supply NT 40 Amp.
1 x	ABS tube 2.0x1.0x1000 mm
1 x	PowerBox iGyro SRS
1 x	OLED-Display for PowerBox Mercury SRS
1 x	PowerBox PROFESSIONAL
1 x	Extension for SensorSwitch 30cm
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	PowerBox PowerExpander SRS
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	Charging Extension 50cm for 2 Battery
1 x	PowerBox Cockpit SRS (incl. SensorSwitch)
1 x	PowerBox Evo
1 x	PowerBox PIONEER incl. microSwitch
1 x	PowerBox Competition
1 x	PowerBox Champion SRS
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Long horn 50x26
1 x	Micro control horn (2 pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	Control horn long w/ball
1 x	Jeti Black cap
1 x	Painting GHT Lexan Black 150 ml
1 x	Light System
1 x	Small aluminium horn red (2pcs)
1 x	Short adjustable control horn 3x24
1 x	Cable control set
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	6 mm M3 variable horn
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	6 mm M3 variable inclined horn
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	20 mm carbon horn
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	DPSI Micro MPS
1 x	DPSI Ampere & Voltage bundle
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	DPSI 2001 RV
1 x	MPX Sub-D Adaptor
1 x	Carbon plate 350x150x1.0 mm
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	eFuel 30A Power Supply
1 x	Power supply NT 25 Amp.
1 x	HITEC Power Supply 30A. Max. 540w
1 x	DPSI OCP Overload protection
1 x	Cover cap drop-shaped paintable 43 mm

5,226.32EUR