Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Screw-lock connector M2 (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	SUS wire 3m (nylon coated)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cockpit plastic closing
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Covered closure or fairings
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Spray EC Red 400ml
3 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Spray adhesive AEROFIX 2
2 x	Universal Colour Paste deep black 50 g
1 x	Universal Colour Paste deep black 250 g
1 x	Digital precision scale up to 2000 g
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Hot Glue Stick GREEN
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	18 mm reinforced hinge
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Xplorer2 anemometro
1 x	Xplorer1 anemometro
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
2 x	Clip fixing for wing (2 pcs)
1 x	140 mm rods + T patellas set for direction control
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	100 mm rods set for direction control
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Snap short M2 (10 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Recessed MPX connector support (6 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	JetiBOX
1 x	Partall paste 650 g
1 x	Nitroverdu 500 ml
1 x	Carbon plate 350x150x1.0 mm
1 x	20 mm carbon horn
1 x	1/12 Pilot "Fighter"
1 x	Carbon plate 350x150x2.0 mm
1 x	120x60 mm C SLH KOVO wheel
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	22m Fitting barb
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Cockpit aluminium closing 5.4g
1 x	20x200 mm battery rings
1 x	Carburator Moki S250
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	Carbon plate 550x350x1.0 mm ECOTECH
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	18m Fitting barb
1 x	Charger SKY RC D200 neo
1 x	Carbon plate 350x150x1.5 mm
1 x	1/6 Pilot "Garry"
1 x	60x25 mm tail wheel "type F3A"
1 x	Round flex hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Wheel 18 mm
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Futaba Female 40 cm extension
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 30 cm female (Futaba)
1 x	Round Rod 1,25x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Large flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	Small pinned hinge (6 uds)
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Foam wheel Ø 351 mm (2 pcs)
1 x	Jeti Advance Pro Program Card
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Marker ties (20 pcs)
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI 2001 RV
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Filter Capacitor JR
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Spinner plastic white fixed propeller 42 mm
1 x	42 mm white plastic spinner for fixed propeller
1 x	50 mm black plastic spinner for fixed propeller
1 x	40 mm white plastic spinner for fixed propeller
1 x	50 mm white plastic spinner for fixed propeller
1 x	45 mm white plastic spinner for fixed propeller
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Servo Mount M (blue)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Receiver bed (Blue)
1 x	Motor mount M
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	DPSI Ampere & Voltage bundle
1 x	Fuel Dot (Black)
1 x	DPSI RV Mini 5 Magic
1 x	DPSI Micro - RCS RV
1 x	Actuador lineal HLS12-100210-7.4v
1 x	DPS Switch JR/JR
1 x	DPSI RV Mini 6 Magic
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	EWC6 40 cm wing connector

4,542.06EUR