119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	LUCAS pilot ARTF
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Parachute P4
1 x	Aramid 50 daN 50 m
1 x	Parachute BACKUP X100
1 x	Trike XL motor set (motor+esc+prop)
1 x	Ballast 700gr OPALE
1 x	Paramotor BackPack XXS (without accessories)
1 x	Wing OXY 5,0 m2
2 x	Parachute PV6 for F3J
1 x	Opale Rucksack
1 x	Para-RC Trike "RC-Bullix"
1 x	Para-RC Mix
1 x	MAX pilot ARTF
2 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
3 x	ABS tube 8.0x6.0x1000 mm
2 x	ABS tube 4.0x3.0x1000 mm
3 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 2.0x1.0x1000 mm
3 x	ABS tube 3.0x2.0x1000 mm
2 x	ABS tube 4.0x2.0x1000 mm
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
3 x	ABS tube 14.0x10.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	ABS tube 6.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	ABS tube 3.0x1.0x1000 mm
2 x	ABS tube 7.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Cabel "Y" 15 cm
1 x	Extension lead 15 cm Multiplex
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Premium servo extension 100cm
1 x	Extension 90 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Extension silicon 35 cm male (Futaba)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x
1 x	SE Ring 300 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Tape GFK 25 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Softshell Hispano Aviación
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Fabric scissors curved Premium, 16 cm / 6" length
2 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 5.0x4.0x1000 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
2 x	ABS tube 3.0x2.0x330 mm
2 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	ABS tube 16.0x14.0x1000 mm
1 x	Soporte filtro FESTO (4 pcs)
2 x	ABS tube 18.0x16.0x1000 mm
1 x	Support Pitot JETI
2 x	Support ECU Xicoy X-45
1 x	Marker ties (20 pcs)
1 x	Tape GFK 50 mm
1 x	Support Filtro FESTO
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Paramotor BackPack XXS 2
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Windsock Ozone L -1200 mm
1 x	X-RAY Micro QR (Rudder)
2 x	Carbon plate 350x150x3.0 mm
3 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Red smoke canister 140 g
1 x	Electric rocket starters (6 pcs)
1 x	Red smoke canister 100 g
1 x	Smoke set "Glider"
1 x	Blue smoke canister 140 g
1 x	Initior Receiver FRX2 Wireless
1 x	White smoke bombs AX-60 (5 pcs)
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Glider KNIRPS
1 x	Glider PIROL
1 x	IKURA GPS 4.28 m
1 x	DELPHIN Race 3.6m c64
1 x	Electric spoiler 185 mm (2 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support pump Xicoy X45
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Set stickers JEEMO "Andy"
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	LOWER TOW HOOK
1 x	Support conector MPX (6 pcs)
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	BlueCom™ Adapter (iOS)
1 x	Conector JR Servo male (10 pcs)
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Blade holder metal LAMA
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	PYRO 600-11
1 x	LENTUS Multiplex Propeller 8x6
1 x	Ion Pro, Fuselage (JP Model)
1 x	SWEET Electro ARF "CFR fuselage " (Top Model)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	12V Car Adapter
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Extension for LC-Display 50cm
1 x	2 piece mounting frame
1 x	Conector JR Servo female (10 pcs)
1 x	MicroMatch PowerBox
1 x	Motor holder for AC 28/7
1 x	Flybar support metal LAMA
1 x	Swashplate metal LAMA
1 x	Carbon blade 230 mm
1 x	Support FUEL DOT V3
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Extension for SensorSwitch 60cm
1 x	KIRA 600-20 6,7:1

24,622.89EUR