20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Nut for mounting M2 (4 pcs) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Pan Head Screw M2x8 PH countersunk head temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Quick Find

Shopping Cart

1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
4 x
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Servo NARO Max Std
2 x	BALSA leading edge 8x10x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 6.0x100x1000 mm
2 x	A/C quality beech plywood 600x300x0.6 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Balsa panel 10x100x1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
2 x	Xplorer2 anemometro
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
2 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Xplorer3 anemometro
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Xplorer4 anemometro
1 x	Couple M4 for wire (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	1/6 Pilot "Tony"
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Straightened rod Ø 5.5 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Tube support Ø 6mm (10 pcs)
2 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
2 x	Support XT60 conector (2 pcs)
1 x	Support FUEL DOT V3
1 x	Balsa panel 3.0x100x1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	NF-1 RC set
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	NF-3X-80 liner Kit
2 x	Jet Afterburner Simulator NF-Jet2
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Covered closure or fairings
1 x	Locking cable tie 2.5x100 (uds)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Xplorer1 anemometro
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	1/4 Pilot "Mike"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Pilot "Anthony" (Slimline)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support pumb/filter Xicoy X45
1 x	Support Pitot JETI
1 x	Motor A20-20 L EVO
1 x	Shaft for A60-L (140mm)
1 x	Balsa panel 1.5x100x1000 mm
1 x	3 LiPo XH>EH adapter
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	1/4 Pilot "Heidi"
1 x	PBY 6/6A Catalina, Observer´s dome (L + R)
1 x	Pushrod octagone 3/2
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Fully Threaded Steel Rod M3
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Landing gear frontal support 25x32x16
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	Cap Hispano Aviación
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Axle for AXI 2212/xx motors
1 x	Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Axle for motor A50-L
1 x	Motor A30-12 L V4
1 x	Radial Mount Set for AXI2814 and AXI2820 V2
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	NF-2 RC set
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	2 LiPo XH>EH adapter
1 x	Canadair CL-415 (aero-naut)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	One touch canopy lock
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Softshell Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Balsa panel 4.0x100x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	DPSI Micro - RCS RV
1 x	ESC ALPHA 60A HV

4,968.06EUR