Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

3 x	80 mm rods set for direction control
1 x	250 mm / 16 mm Airbrakes
1 x	Allen wheel collar M4x4
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	100 mm rods set for direction control
2 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	11 mm Rubber pads (14 pcs)
2 x	140 mm rods + T patellas set for direction control
2 x	28x5 mm wires output (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
2 x	38x4,5 mm wires output (2 pcs)
2 x	Clip mini fixing for wing (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Allen wheel collar M3x3
1 x	140 mm rods set for direction control
3 x	Cable grommet Ø 4 mm (4 uds)
1 x	Allen wheel collar M3x5
2 x	Cap Hispano Aviación
1 x	Lead with adhesive (2 pcs)
1 x	45 mm rods set for direction control
1 x	Split pin 1x8 mm (10 uds)
1 x	Vest clothes Hispano Aviación
1 x	Snap short M2 (10 uds)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Shirt Hispano Aviación
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Cockpit aluminium closing
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
2 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	DYNAMOMETER S-1580
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
3 x	Allen wheel collar M4x6
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Interface Jack Adapter IKARUS
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	43x14 mm hard foam KOVO wheel (2 pcs)
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	45 mm rods + T patellas set for direction control
1 x	120x60 mm SLH KOVO wheel
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
1 x	89x25 mm (3.50") Type jets aluminium core wheel
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Control for forward wheel (MINI)
2 x	Covered closure or fairings
1 x	Cockpit aluminium closing 5.4g
1 x	2,3 mm Prop Drive Günther M4
1 x	Locking cable tie 4.6x203 (uds)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 12 mm Ø 4 mm
1 x	One touch canopy lock
1 x	Cockpit plastic closing
1 x	Locking cable tie 2.5x100 (uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Canopy Latch
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
2 x	Piloto jet 130 mm
1 x	1/12 Pilot "Cougar"
1 x	1/4 Pilot "Mike"
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Servo arms set HS-65HB/MG/5065MG
1 x	Blind nut M6 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	1/6 Pilot "Tony"
1 x	1/4 Pilot "Heidi"
2 x	Motor OS 3820-1200 electric
1 x	Motor OS 55 AX
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	OS GT15 W/E-4040 for airplane
1 x	Connectors banna oro 2 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Motor OS FS-62V 4T
1 x	Motor OS 46 AX II
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Screw M2x6 (10 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Plastic wheels 36 mm (2 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Landing gear strap small (4 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	50 mm servo arm with bearing (2 pcs)
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Langley"
1 x	Piloto JET 1:3,5
1 x	Socket Head Screw M2x5
1 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "Garry"
1 x	Socket Head Screw M2x12
1 x	1/6 Pilot "Cindy"

4,468.16EUR