Top » Catalog » Emcotec » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Turbina XICOY X240 compact
Turbina XICOY X240 compact
3,385.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Jeti Black cap
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Black silicone 0,25 mm² wire (25 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
2 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
2 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x White silicone 0,25 qmm wire (100 m)
1 x 10m servo "Premium" wire (white/red/blue)
2 x Cable Cargador FUTABA
1 x PVC 0,08 qmm Futaba servos wire (5 m)
3 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x 100m servo "Premium" wire (white/red/blue)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
2 x XH female balance (4S) connector (2 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 3 mm (M/F)
2 x Short ball link M2 (6 uds)
1 x Vacuum pump 12 CFM
1 x Screwdriver for Hexagon 1,27mm
2 x M2,5 5Diam black ball link V2 (2 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
3 x Socket head ball link M3 (2 uds)
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x 6 mm ball link M3 (10 pcs)
2 x Short ball link M3 (6 uds)
2 x Socket head ball link M3 (2 uds)
1 x 
1 x Digital precision scale up to 2000 g
1 x Screwdriver for Torx® TX6
1 x Hot Glue Stick RED
2 x Long ball link M1.6 (6 uds)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Starter EM Gear Power 80
1 x Z Bender - S Type Tool
1 x Hot Glue Stick GREEN
2 x Starter Sullivan-STAR 601
1 x Ball link M3 (6 uds)
1 x Copier 5x20 cm pcs
2 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x M3 Maxi ball link (2 uds)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x Starter Sullivan-STAR 603 DINATRON
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x M3 Maxi ball link (2 uds)
1 x Screwdriver for Hexagon 1,5mm
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Dust collector for mould cleaning
2 x Starter 12v (Max 180 and 30ccm)
1 x Xplorer2 anemometro
2 x Ball link M1.6 (6 uds)
1 x 
1 x Copier 2x20 cm pcs
1 x Ball link M3 (10 pcs)
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x 
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x Miniature brass strap hinge, 1 m
2 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Socket head long ball link M3 (6 uds)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Extension MPX-MPX 20 cm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Silicone black 4,0 qmm wire ( 1 m)
2 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x XH male balance (6S) connector (2 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Silicone red 0,75 qmm wire ( 25 m)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Green silicone 0,25 qmm wire (50 m)
1 x XT-30 connector (pair)
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x 200m servo "Premium" wire (white/red/blue)
2 x Silicone red 0,25 mm² wire (25 m)
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x Silicone red 4,0 qmm wire (25 m)
1 x 5 line servos wire black (1 m)
1 x XH male balance (2S) connector (2 pcs)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x XH female balance (9S) connector (2 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x XT60 Connector with Holder Male 2pcs
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x White silicone 0,25 qmm wire (150 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x XH male balance (5S) connector (2 pcs)
1 x Cable set PREMIUM, fuselage/wing
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x XH female balance (8S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Llave dinamomterica 74 Z 0 0 21
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
2 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Xplorer4 anemometro
1 x Propeller diller 5/6,3/8/9
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x Mold plugs XT-30
1 x Hot Glue Stick BLACK
1 x Heli digital angle measurer
1 x Ball link M2 (10 pcs)
1 x Xplorer3 anemometro
1 x Pistola termica MH 550 micro
1 x Joint with bearing M2,5 22x5,5
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Turbine RHINO 200 SE 20.4 Kg
1 x Turbine RABBIT 100 SE 11 Kg
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Starter 12v (Max 90 and 15ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x XT-60 Plug Mold
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x Ball link M3 (10 pcs, flat ball)
1 x Socket head long ball link M3 (2 uds)
1 x Screwdriver for Torx® TX8
1 x Joint with bearing M2 22x5,5
1 x Mold plugs XT-90
1 x Joint with bearing M3 22x5,5
1 x Ball link M2,5 (10 pcs)
1 x Sub-D Plug Mold
1 x Propeller diller for DLE111 and DA85-150
1 x Long ball link M2 (6 uds)
1 x Z Bender - S Type Tool
1 x MPX 8 pins plug mold
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Handle for PERMAGRIT lime
1 x Vacuum pump P1-N
2 x M3 Maxi ball link (2 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Dremel PERMAGRIT 18 mm round lime
1 x Servo M2x5/16 screw (4 pcs)
1 x Silicone black 1,0 qmm wire ( 25 m)
1 x Silicone red 2,5 qmm wire ( 25 m)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Head core bushing
1 x Propeller Pleg CAM Carbon 15x6
1 x Welder 100W/200V
1 x Pump hose (Ø 6/8 mm) transparent
1 x TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG
1 x LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG
1 x LiPo TopFuel ECO-X 3800mAh 3s 20C MTAG
1 x TopFuel LiPo 20C-ECO-X 5000mAh 2S MTAG
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x DPSI RV Mini 5 (2008)
1 x Superlight wheel 125 mm with valve (2 pcs)
1 x Wheel 28 mm
1 x Wheel FEMA 127 mm / 6 mm
1 x Wheel FEMA 90 mm / 6 mm
1 x Wheel Ø 75 mm (1 ud) Electron Retracts
1 x Heat sink for Optotronix LEDs
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
14,168.27EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to DPSI Ampere battery backer
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce