Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Tube Pitot to PIXHAWK
1 x	Connector CAN 15
1 x	Connectors banna oro 4 mm (M/F)
2 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector Servo female 4 pines
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Field folding model stand
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Cap Hispano Aviación
1 x	Red smoke canister 65 g
1 x	5 mm Prop Adapter M8
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Hot Glue Stick GREEN
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH female balance (3S) connector (2 pcs)
1 x	GameCommander USB Universal
1 x	XH male balance (5S) connector (2 pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	XH male balance (4S) connector (2 pcs)
1 x	Dean-T Plug Mold
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	25 mm Sandpaper file
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Sparkplug NGK CM6
1 x	Digital weight, angle and balance meter BASIC
1 x	Concave-Convex sandpaper file 13 mm
1 x	Crimping tool
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x
1 x	Ball Link Plier
1 x	1,5x50 mm allen screwdriver
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	Horn with ball 40x30
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	20 mm carbon horn
1 x	6 mm M3 variable horn
1 x	Horn 6/35 with M3 Bearing
1 x	Horn mando long (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	5 mm M2 variable inclined horn
1 x	6 mm aluminium horn with patella
1 x	SE Ring 240 mm (2 pcs)
1 x	Ballast 700gr OPALE
1 x	Rescue 1,8m2 / BackPack
1 x	Sparkplug Saito 400
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	GPS Altis
1 x	Telemetry interface ALTIS 6 cm
1 x	Horn 5/10 with M2 Bearing
1 x	Cable control set
1 x	6 mm red aluminium threaded horn with patella
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Extension 7.5 cm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Set Altimeter SHRead
1 x	Keypad ALTIS V4
1 x	Altimeter Altis V4
1 x	Telemetry interface ALTIS 20 cm
1 x	Altimeter Altis NAO
1 x	Telemetry interface ALTIS 12 cm
1 x	Telemetry interface ALTIS to Futaba
1 x	SE Ring 400 mm (2 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Cable video GoPro and 5V cable
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Cable video GoPro
1 x	MR30 connector female
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Carbon blade 3D 230 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Beech dowels 10 mm x 1000 mm
1 x	PIN Connector female (100 pcs)
1 x	Variable Flow Smoke Pump System
1 x	Burner Plug K30/ K45
1 x	MPX Sub-D Adaptor
1 x	Interface Realflight Simulator
1 x	Wing OXY 5,0 m2
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	DPSI Micro MPS
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Heli blades angle measurer
1 x	MPX plug mold V1
1 x	XT-60 Plug Mold
1 x	Z Bender - S Type Tool
1 x	Handle for PERMAGRIT lime
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Small aluminium horn red (2pcs)
1 x	Control horn long w/ball
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Rudder forward 80x28 "type Kato"
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Micro control horn (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	SE Ring 480 mm (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	9x4.7 * 22x12 carbon propeller
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	MR30 connector male
1 x	Protector Connector MPX (1 pair)
1 x	Conector XT-30 (macho)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Contacto macho pin conector (10 pcs)
1 x	XPower XC4226/12 LS
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	Size "M" motor holder for class 400
1 x	Protector Connector Dean-T (1 pair)
1 x	Electric coversion set
1 x	Conector MT-60 (pair)
1 x	Red 4 mm connector holder
1 x	Connectors MPX black female
1 x	SIMtransmitter 6 Mode 2
1 x	Motor holder AXI
1 x	Turbine KINGTECH K85 G4
1 x	Motor OS 3820-1200 electric
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)

8,169.26EUR