119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CC 02
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x MPX-Dean "T" Adapter
1 x CC 05
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x USB HLS prog. interface
2 x Quicklock washer 2 mm (10 pcs)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/EC3
2 x APM2.6 Power module with 5.3V DC BEC
1 x CM-3
1 x Quicklock washer 3.5 mm (10 pcs)
1 x M3 black washers (4 pcs)
2 x Aluminium cap bolt washer M4 green (8 pcs)
2 x JETImodel SINGLE BEC
1 x 5 LiPo XH>EH adapter
1 x Fixed launching hook
1 x LOWER TOW HOOK
3 x Interface Realflight Simulator
2 x Interface Jack Adapter IKARUS
2 x RF9 Flight Simulator with Spektrum Controller
2 x SIMtransmitter 6 Mode 2
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x 2,0x50 mm allen screwdriver
1 x RH long aluminium horn (2pcs)
1 x Small aluminium horn red (2pcs)
1 x ABS Strip 1.5x4.0x1000 mm
1 x 
1 x Hardener Aero EPH 161 (500 g)
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
2 x 460 mm EPP Floats
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Brake for 140 mm wheels
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Tren de cola carbono 50-70cc
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Dean "T" - Futaba Adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 4 LiPo XH>EH adapter
1 x Quicklock washer 3 mm (10 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Screw M3x5 (10 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x LED blink wire flashing (green - 2pcs)
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x LED wire (orange - 2pcs)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Flat washer 1.7 mm (20 pcs)
1 x BEC 3A FOXY
1 x Spring pin Ø 1 x 6 mm (10 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Screw M4x20 (10 pcs)
1 x ALU servo arm 90º 3 mm shaft
1 x Servo Fork
1 x Blade holder center
1 x Baering 3x8x4
1 x Slave-cable USB Easy Sim
1 x LA500 cyclic central part
1 x Side rudder
1 x Servo AN-20 MGBBA
1 x Balls 4 mm
1 x LA500 rotor head shaft
1 x HV6150 Digital Servo
1 x Nut M2
1 x Flybar support metal LAMA
1 x Initior Receiver FRX2 Wireless
1 x B4-0 rocket charges (6 pcs)
1 x Remote electric ignition system
1 x "S" set for planes
1 x Initior Transmitter FTX2 Wireless
1 x Piñon motor rotor LA-500
1 x Screw M3x16
1 x Servo MKS HV747
1 x 65 mm mini servo cover
2 x Adjustable launching hook
1 x 40 mm servo arm with bearing (2 pcs)
1 x Rotorshape Autogyro
1 x AC-10 pre-rotacion with motor
1 x Servo TOPMODEL STANDARD S3217
1 x Head upper part
1 x LA500 freewheel bearing
1 x Head spacer
1 x Head lower part
1 x Towing hook
1 x LA500 pre-rotation gear hub
1 x Servo AN-8 HBA
1 x Blades 330mm
1 x SERVO HOLDER
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x Servo MKS 6100 DS
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Rotorshape Elevator
1 x Blade Holder (3 blades)
1 x 90x75 mm standart servo cover
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Soporte servo KST X08/H and Plus
1 x Hitec 52 mm servo arm
1 x Hitec 25 mm servo arm with M3 ball link
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x T-shape holder metal LAMA
1 x Blade holder metal LAMA
1 x Coversion set HIROBO EX/EAGLE elektro
1 x Wing Joiner BULL MØ1 2.600mm
1 x Boomerang SPRINT V2 Red/Yellow
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x F-16 Scale 1:6, Electric retract landing gear
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Boomerang ELAN THUNDERBIRD Combo
1 x Tank BULL MØ1 4L (CMJets)
1 x Pipa 3D BULL MØ1 2.600mm
1 x RANGER Jet CANADA 1.854mm combo
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x Tank BULL MØ1 3L+14L Smoke (CMJets)
1 x Bags BULL Mo1 2.6m "Luxe"
1 x MB-339 Aermachi 84" ARF c/retractil electric
1 x RANGER Jet NAVY 1.854mm combo
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr
1 x Fuselage BULL MØ1 2.600mm
1 x RANGER Jet Red/Yellow 1.854mm combo
1 x Boomerang ELAN STARS & STRIPES Combo
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x Pipa BULL MØ1 2.600mm
1 x TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x Electric Landing Gear F9F COUGAR
1 x Electric Landing Gear Trainer Jet Intro
1 x ASPIRE Red ARF 2.000 mm, Set Elevators
1 x ASPIRE Red ARF 2.000 mm
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x F-16 Scale 1:6 (1.630mm)
1 x ASPIRE Blue ARF 2.000 mm
1 x Electric Landing Gear ASPIRE
1 x Jet Pipe for ASPIRE 2m JMF
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x F9F COUGAR Grey ARF 1.562 mm
1 x F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x Bags de Luxe ASPIRE
1 x ASPIRE Navy ARF 2.000 mm
1 x Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x Bags wings/rudder ASPIRE
1 x Landing gear retract neumatic (Jet Legend)
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Air pressure gauge
1 x PRO-HV Dual Action Valve
1 x Epoxy 10 min 190g
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,2 mm M6
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Couple M4 for wire (10 pcs)
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x DPSI RV Mini 5 Magic
1 x DPS Switch JR/JR
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
51,594.01EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies