16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock	Conector JR/Uni Servo female BLUE silicon (10 pcs) temporarily out of stock	Ball link M3 RPA's-UAV's temporarily out of stock

Quick Find

Shopping Cart

2 x	800TVL CMOS camera for FPV
1 x	USB Mini Camera endoscope
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	PPM Encoder Module
1 x	Tube Pitot to PIXHAWK
3 x	PIX Hawk with accesories
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
3 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
3 x	LOWER TOW HOOK
1 x	BALSA leading edge 8x10x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 RPA's-UAV's
1 x	M3 Maxi ball link (2 uds)
1 x	Socket head long ball link M3 (6 uds)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Ball link M3 (6 uds)
2 x	Ball link M3 (10 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	DPSI magnetic switch actuator (housing)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x
1 x	Propeller POWER-PROP 7x7
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Short ball link M1.6 (6 uds)
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Towing hook
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
4 x	Tow hook for tug
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
2 x	Adjustable launching hook
2 x	BALSA trip 10x10x1000 mm
2 x	Towing hook
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cotton Flocks, bag/ 7 Kg
1 x	Cotton Flocks, bag/ 500 g
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 3,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Pegamento Pu R 50g polyuretano
1 x	UHU hart 35 g
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Socket head long ball link M3 (2 uds)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	50 mm black plastic spinner for fixed propeller
1 x	Spinner plastic black fixed propeller 30 mm
1 x	IKARUS plane
1 x	Propeller 8x4,3 SlowFlyer
1 x	50 mm white plastic spinner for fixed propeller
1 x	Spinner plastic red fixed propeller 30 mm
1 x	45 mm white plastic spinner for fixed propeller
1 x	36 mm black plastic spinner for fixed propeller
1 x	Spinner plastic white fixed propeller 42 mm
1 x	40 mm white plastic spinner for fixed propeller
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	120x60 mm SLH KOVO wheel
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Balsa panel 1.5x100x1000 mm
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	DPSI 2001 RV
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Filter Capacitor JR
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Balsa panel 2.0x100x1000 mm
2 x	SERVO HOLDER
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Bidule 55 V3 2460 mm
1 x	50x45 mm micro-mini servo cover
1 x	BU 131 Jugmann Panel Instrum. trasero
1 x	BU 131 Jugmann Panel Instrum. frontal
1 x	LS-8 GFK 6m Glider
1 x	Glow filter
1 x	Optotronix Aurora Plug
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Cover cap drop-shaped paintable 43 mm
1 x	DPSI Micro MPS
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)

6,443.55EUR