20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Pan Head Screw M2x8 PH countersunk head temporarily out of stock	Nut for mounting M2 (4 pcs) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Quick Find

Shopping Cart

1 x	Black large kwik link (10 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Metal clevis M2 (10 uds)
1 x	Kwik link with arm M3xM2xL24
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Metal clevis M2,5 (10 uds)
1 x	Cable coupler M3 (10 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Metal ball clevis M3 (10 uds)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 200cc Std
1 x	Motor DLE 430 cc - Paramotors
1 x	Big Crow DLE-170M
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	18 mm reinforced hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	25 mm reinforced hinge
1 x	Micro flex hinge (12 uds)
1 x	Long pinned hinge (12 uds)
1 x	15 mm reinforced hinge
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Xplorer1 anemometro
1 x	Smoke set "M"
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x
1 x	Propeller balancer
1 x	WingFix ULTRA Black Edition
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	Optical RPM Sensor
1 x	Carbon plate 350x150x1.0 mm
1 x	280 cc gasoline fuel tank complet
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Small pinned hinge (12 uds)
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Motor HP 220/30/A3 P4 5:1
1 x	Charger LiPo Charger4
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	VBar NEO VLink 6.x Express, neon-yellow
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	PHASOR RACE 2035/4100 1D
1 x	TMM 1210-3S heli
1 x	Mini-Pix Esc 15 Amp
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	102 mm INO spinner (carbon imitation)
1 x	Receptor MINIMA 6S HITEC
1 x	Servo HITEC HS-225 BB
1 x	Servo HITEC D950 TW
1 x	Servo HITEC HS-485 HB
1 x	Servo HITEC D625 MW
1 x	Servo HITEC HS-45 HB, servo box
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI LR-S (with push buttons)
1 x	PowerFuel RX V2 Fuel Pump
1 x	FALCON 25X9 CARBON PROPELLER (GAS)
1 x	Wire easy tensioner (silver)
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	HITEC DPC-11 programmer
1 x	Servo lock HS-80/81/82/85 (2 pcs)
1 x	Servo Digital HITEC HS-5065 MG
1 x	Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch
1 x	Servo HITEC HS-125 MG
1 x	Servo HITEC D85 MG
1 x	Servo HITEC HS-311
1 x	Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x	Servo HITEC HS-225 MG
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Servo HITEC HS-5084 MG
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	OPTOTRONIX Aurora LCU
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPS Switch JR/JR
1 x	Propeller balancer
1 x	DPSI OCP Overload protection
1 x	Medidor ángulos y/o incidencias

12,412.81EUR