20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Pan Head Screw M2x8 PH countersunk head temporarily out of stock	Nut for mounting M2 (4 pcs) temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Quick Find

Shopping Cart

1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 5,0x1000 mm
3 x	Tow hook for tug
2 x	Fixed launching hook
1 x	Towing hook
1 x	SERVO HOLDER
1 x	LOWER TOW HOOK
1 x	CC 01
1 x	ABS tube 9.0x7.0x1000 mm
2 x	ABS tube 8.0x7.0x1000 mm
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	Adapter lead MPX/EC3
2 x	USB HLS prog. interface
1 x	30 cm BEC cable (female)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
2 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
2 x	Adapter lead MPX/XT60
1 x	CM-3
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	JETImodel SINGLE BEC
2 x	ABS tube 5.0x4.0x1000 mm
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Ply-Span 450x600/13g White
1 x	Short ball link M3 (6 uds)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	"S" set for planes
1 x	Round Rod 1,25x1000 mm
1 x	Propeller POWER-PROP 7x7
1 x	Towing hook <3m
3 x	Towing hook
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
3 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	ABS tube 6.0x4.0x1000 mm
1 x	CC 02
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon plate 350x150x1.0 mm
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
2 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	DPS Switch JR/JR
1 x	Fiberglass tube 6/4x1000mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	2 LiPo XH>EH adapter
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Battery bed V2_S (black)
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Adapter 3,0 mm M8
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	10 mm dogdrive props
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	2,3 mm Prop Adapter M5
1 x	Allen wheel collar M3x5
1 x	Windsock Ozone L -1200 mm
1 x	XH LiPo extension lead
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	4 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M5
1 x	Adapter 3,0 mm M6
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	5 mm Prop Adapter M6
1 x	Dean "T" - Futaba Adapter
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	5 mm Prop Adapter M8
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	SLICK 360-B 104" (2640 mm)
1 x	Cessna SKYLANE T182 1.75m - Seagull Model
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	BULLIT Wing 1095 mm
1 x	Xoar Electric Beechwood Prop 20x10
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	LUCAS pilot ARTF
1 x	EDGE 540-A 74" (1880 mm)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	ANGEL 48" pp red/blue/white
1 x	EXTRA NG 85" 2159mm red/white
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	SLICK 360-A 104" (2640 mm)
1 x	Servo Connector Brackets (10 pcs)
1 x	Electric Landing Gear Trainer Jet Intro
1 x	Electric Landing Gear ASPIRE (Elektron Retracts)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Landing gear Rocket 400
1 x	3 LiPo XH>EH adapter
1 x	TrainerCord (master-learner)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Medidor ángulos y/o incidencias
1 x	HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x	Bags de Luxe ODYSSEY
1 x	Fuselage BULL MØ1 2.600mm
1 x	F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x	ASPIRE Navy ARF 2.000 mm
1 x	Electric Landing Gear F9F COUGAR
1 x	DPSI OCP Overload protection
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Lipo RAY 2200 mAh 2s 7.4v 30C
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	OPTOTRONIX Aurora LCU
1 x	4,8x1000 mm 2:1 blue termoretract tube

21,338.03EUR