16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Quick Find

Shopping Cart

1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	12.7 mm 2:1 black termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Oracover Azul Cielo 2 m
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	19 mm 2:1 black termoretract tube
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 blue termoretract tube
2 x	SERVO HOLDER
1 x	Small Crow DLE-170M
1 x	Big Crow DLE-170M
2 x	Towing hook
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	15 mm reinforced hinge
3 x	Large flex hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Flap hinge (6 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	18 mm reinforced hinge
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
3 x	Long pinned hinge (6 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Gates hinge
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Angle measurer
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Air pressure gauge
1 x	Support FUEL DOT V3
1 x	Fiberglass landing gear for 140-160
1 x	Support ECU Xicoy X-45
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Adjustable launching hook
1 x	Towing hook <3m
1 x	Tow hook for tug
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Maleta transporte FUTABA 10PX
1 x	Adap/Exten for Futaba 12-14C
1 x	Futaba Neckstrap
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	Battery FUTABA 18MZ
1 x	FPV Station for SE TX-Tray V1
1 x	Receiver bed (Blue)
1 x	Futaba Radio Case
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	25 mm reinforced hinge
1 x	Pin hinge 26x11 mm (10 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M8
1 x	Oil FUCHS 1 liter
1 x	Spark Ceramic JETCENTRAL
1 x	Turbina KINGTECH K120 G4
1 x	9x4.7 * 22x12 carbon propeller
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	15x7 tree blades propeller LEFT
1 x	29,0 mm propeller (left propeller)
1 x	2,3 mm Prop Adapter M6
1 x	1000 ml sealer (DOPE)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	290 mm M4/4 mm Prop shaft
1 x	3.2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	2.3 mm Adapter for 30 mm spinners
1 x	10 mm portholes (10 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	250 mm / 16 mm Airbrakes
1 x	12x6 tree blades propeller
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	3 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M8
1 x	16x10 tree blades propeller Master Airscrew
1 x	31,0 mm propeller (rigth propeller)
1 x	12 mm mast holder
1 x	HDT Jet Central
1 x	Power Pack SE Series JETCENTRAL
1 x	Turbina KINGTECH K55G4
1 x	FOD Screen K140G/K180G/K210G
1 x	KingTech T-Modul 5 in 1 Telemetry
1 x	BULL MØ1 2.600mm RED
1 x	BULL MØ1 2.600mm BLUE
1 x	OS Engine 105HZ-R Heli with pipe 105
1 x	Motor OS 37 SZ-H
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	DPSI OCP Overload protection
1 x	Futaba Multi-Switch 16 MODUL
1 x	LED blink wire flashing (red - 2pcs)
1 x	La Capitania di Venetia 1:50
1 x	SCHARNHORST accessories
1 x	JETI Counter for DC-24 Carbon Design 3
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Switch Spring-Loaded 2-Position DC Tx DUPLEX 2,4EX
1 x	DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	Teacher / Student Cable
1 x	Transmitter Stick Ends JETI DS-16/14
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x	Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x	Motor OS 55 AX
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Three-function control switch by FUTABA
1 x	Decorative caps, multicoloured

17,920.59EUR