Top » Catalog » Emcotec » EMCOPT2000

53.90EUR

OPTOTRONIX Aurora LCU
[EMCOPT2000]


Product description:
The Optotronix Aurora LCU is the follow-up of the established ACL ProControl. With a wide range of functions and intelligent firmware it sets new standards for R/C flight lighting. With dimensions of only 40 x 15 mm (1.57 x 0.59 in) and a weight of only 12g (0.42oz) the new lighting electronic brings the following features: - More outputs - more power 6 outputs with output power of up to 1.5A each for more power in R/C lighting.
- Light weight: The Optotronix Aurora LCU not only is small and leight weight - now it also can be used with 1 cell lithium polymer (1S-LiPo) or one cell LiFe batteries. Due to that fact lighting systems with slightest weight are realizable.
- Easy operating: A easy to use button as well as 7 status LEDs ensure an easy, fast and direct operating.
- Flexible and intelligent: Activation moment and function can be programmed for each output - easily via button. Furthermore Optotronix Aurora LCU fits itself to the used remote control and spares programming work.
- Enormous lighting functions: Numerous flash sequences and dimming effects are available. Even the desired moment for the flashes can be selected.
     - 7 different flash sequences with each three different moments selectable.
     - 2 beacon effects (for simulating rotating beacon).
- Now also afterburner simulation Furthermore the controlling of LEDs and afterburner rings with six different, true to original, randomly generated afterburner effects is possible. Different start modes (ignition behavior) are selectable. So every jet, doesn't matter if small fun model or large scale model, can be enhanced with the appropriate afterburner effect.
     - 7 different afterburner effects for impeller and turbine models
     - Randomly generated flicker behavour
     - Different start modes: glowing, backfire, multiple backfire
     - Operating of individual LEDs, afterburner rings
- Stand alone: At the push of a button standalone mode can be activated - the selected outputs stay active even without receiver signal - perfect for exibitions or ratings.
- Battery surveillance: The status of the battery can be requested in six steps. When critical battery voltage a warning occurs and the LCU switches off. When battery not seperated from the electronic the lighting will be switched off.
- Maximum safety: Electric consumers that are not receiver related, shouldn't be connected to it. So the Optotronix Aurora LCU has a galvanic isolation (opto-coupler).
- Easy installation: As accessory the Aurora Plug (Item no. OPT2010) is available. Aurora Plug is a plug strip with gold plated contacts, which simplifies and precipitates soldering of the lighting.

Specifications:
- Number of outputs: 6
- Max. current per output: 1.5 A
- Operating voltage: 3.1 - 8.2 V (1S/2S LiPo, 1S/2S LiFe, 3S/4S/5S NiMh)
- Flash sequences: 21
- Beacon effects: 2
- Afterburner effects: 7
- Updatable: Yes
- Stand alone mode: Yes
- Dimensions: 40x15 mm (1.57x0.59 in)
- Weight: 12 g (0.42 oz)





temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Emisora Spektrum NX10 10ch (solo Tx)
Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Cinta Goldfix 1m
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spikes Band (5 m)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 400 mm (2 pcs)
1 x 20x200 mm battery rings
2 x SE Ring HACKER 300 mm (2 pcs)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Marker ties (20 pcs)
2 x 20x1000 mm Ring Strap Back To Back
2 x Tape GFK 50 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 38 mm
1 x SE Ring 350 mm (2 pcs)
4 x Para-RC Trike "RC-Bullix"
3 x Parachute BACKUP X100
2 x Wing OXY 5,0 m2
2 x Wing OXY 0,5 pulgadas2
1 x Rescue 1,8m2 / BackPack
2 x Opale Rucksack
2 x Paramotor BackPack XXS 2
3 x Windsock Ozone L - 700 mm
1 x Windsock Ozone L -1200 mm
1 x Trike XL motor set (motor+esc+prop)
1 x Jeti Black cap
1 x Profile ABS Square 1 x 1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Flat Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Profile ABS Square 3 x 1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x Balsa panel 6.0x100x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x A/C quality beech plywood 600x300x0.6 mm
2 x Balsa panel 2.0x100x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Z type of cable coupler Ø 1 (2 uds)
1 x 1/10 Pilot "Jack"
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Spare Part Frame Set for EACHINE RACER 250
1 x APM2.6 Power module with 5.3V DC BEC
2 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Paramotor BackPack XXS (without accessories)
2 x Para-RC Mix
2 x Support FUEL DOT V3
2 x MAX pilot ARTF
1 x Recessed MPX connector support (6 pcs)
2 x Tube support Ø 6mm (10 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x Paramotor Kit Camo H1.5/ Ben Red
2 x Aro pasacable Ø20 mm (4 pcs)
2 x Support XT60 conector (2 pcs)
1 x Green smoke canister 100 g
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Actuador lineal HLS12-100210-7.4v
1 x Quick hose connector 6-4 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
3 x DPSI Micro MPS
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Manometer 4 mm
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x DPSI LR-S (with push buttons)
1 x Receiver replacement antenna, approx. 15
1 x Flap hinge (6 pcs)
1 x Foreman, scale 1:32
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x wing/fuselage connector for 12 pines AWG 20-24
2 x Heat sink for Optotronix LEDs
1 x Aluminium sheet 500x250x0,5mm
1 x Rubber profile 8-2 mm 2M
1 x DPSI Ampere & Voltage bundle
1 x ABS angle 2,0x2,0x1000 mm
1 x Mini Infrared Thermomiter
1 x Magnetic Connect locking system
1 x DPSI RV Mini 6 Magic
1 x ABS rectangular profile 10x5.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x AX-60 starters (5 pcs)
1 x BALSA triangular 8x8x1000 mm
1 x Secraft Fuel system v2, red color
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Black smoke bombs AX-60 (5 pcs)
1 x 3l Smoke oil
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Balsa panel 2.5x100x1000 mm
2 x A/C quality beech plywood 600x300x6.0 mm
1 x White smoke canister 65 g
1 x Rudder 2_Tray 4.5~5 inch
1 x Servo Mount M (blue)
1 x Red smoke bombs AX-60 (5 pcs)
2 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x EDF Stream-Fan 110mm kv780
1 x Cable adapter iCharger
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x DJI FPV Combo
1 x Set cintas unión paracaídas 145 cm
1 x Bateria DJI Mini 2 2250 mAh
1 x Esc master MEZON 120 Lite
1 x Axle for motor A20-S (3 uds)
1 x 65 mm mini servo cover
1 x 50m servo "Premium" wire (white/red/blue)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Black silicone 0,25 mm² wire (25 m)
1 x Support conector MPX (6 pcs)
1 x White silicone 0,25 qmm wire (150 m)
1 x Neck strap Double V2
1 x Avia (Top Model)
1 x 18 mm wing servo holder
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Bidule 55 V3 2460 mm
1 x 11 mm wing servo holder
1 x Paramotor Trike XL
1 x 90x75 mm standart servo cover
1 x Astra wing Joinner (Top Model)
1 x Albatros red/white (Top Model)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x BULLIT Wing 1095 mm
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Green silicone 0,25 qmm wire (50 m)
1 x White silicone 0,25 qmm wire (100 m)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Support Pitot JETI
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Support Flush MPX Conector (6 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support Filtro FESTO
1 x Silicone red 0,25 mm² wire (25 m)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Glider Ka 7 Red (2540mm)
1 x ABS tube 4.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x DPSI V-Match
1 x Hose clamps 0.16-0.20in, (4 pieces)
1 x Head lower part
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Motor Mount for Multiplex FunJet
1 x FuelTank Cap (blue)
1 x Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x DPSI RV Mini 5 Magic
1 x EWC6 40 cm wing connector
1 x Adapter 3,2 mm M6
1 x 28 mm tailwheel unit
1 x Fueling valve "Air"
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Switching module high voltage SXH
1 x SERVO DES 658 BB MG
1 x Couple M4 for wire (10 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x 2 mm Prop Adapter M5
16,067.07EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to OPTOTRONIX Aurora LCU
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce