119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Long pinned hinge (6 uds)
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Extension lead 15 cm Multiplex
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Cabel "Y" 15 cm
1 x	4 mm Prop Adapter M6
1 x	4 mm Prop Adapter CN-Spinner
1 x	Futaba Female 40 cm extension
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 30 cm male (Futaba)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Extension silicon 30 cm male (Graupner)
1 x	2,3 mm Prop Adapter M6
1 x	Tirpiz Battleship 1:200
1 x	Extension silicon 35 cm male (Futaba)
1 x	3,2 mm Prop Adapter M6
1 x	Premium servo extension 50cm
1 x	2,3 mm Prop Adapter M6
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	"S" set for boats
1 x	FIALA Propeller 23x8 Electric
1 x	Support pump Xicoy X45
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	CAM-Carbon Light Prop 14x6" (Prop right)
1 x	CAM-Carbon Light Prop 8x4.5" (Prop left)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	CAM-Carbon Light Prop 10x5" (Prop right)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Boat vents 10mm (2pcs)
1 x	CAM-Carbon Light Prop 12x6"
1 x	CAM-Carbon Light Prop 14x6" (Prop left)
1 x	Cancamo con aro 16/6.5 mm (10 pcs)
1 x	Cable pass Ms 9x5 mm (10 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Bocina 30 mm (1 pcs)
1 x	CAM-Carbon Light Prop 9x5" PHANTOM (Prop left)
1 x	Cadena 1.0mm x 1 m
1 x	CAM-Carbon Light Prop 10x7"
1 x	CAM-Carbon Light Prop 10x5" (Prop right))
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Axial ball bearing Ø 5 mm
1 x	Carburator joints for SAITO FA80/80GK/72/72GK
1 x	CAM-Carbon Light Prop 11x6"
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Spare white 38-45 mm spinner
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Spinner red 36-38 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Schul-Malpinsel Gr.5
1 x	LOWER TOW HOOK
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	45 mm rods set for direction control
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	LA500 freewheel bearing
1 x	Head upper part
1 x	Head spacer
1 x	Blade holder center
1 x	Balls 4 mm
1 x	Glow starter with charger 230v
1 x	DUPLEX 2.4EX Central Box 210
1 x	DPSI OCP Overload protection
1 x	Spinner NUT M6
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Spinner NUT M6
1 x	DPSI Ampere & Voltage bundle
1 x	Spinner NUT M8x1,25
1 x	DPSI Ampere battery backer
1 x	OPTOTRONIX Aurora LCU
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	DPSI RV Mini 5 Magic
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Spinner NUT M10x1
1 x	Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x	DPS Switch JR/JR
1 x	DPSI RV Mini 5 (2008)
1 x	Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x	DPSI LR-S (with push buttons)
1 x	DPSI Micro MPS
1 x	PowerFuel RX V2 Fuel Pump
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4

6,572.97EUR