119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
2 x	Monokote ROJO misil (1.8x0.65m)
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover light Grey 2m
1 x	Oracover Green10 m
2 x	Oracover Azul Cielo 2 m
2 x	Oracover Brown 2 m
1 x	Oracover Verde 2 m
1 x	Oracover Yellow CADMIO 10 m
2 x	Ply-Span 450x600/13g Blue
1 x	Oratex Antik 2m
2 x	Oracover CARBON Metalic 1 m
2 x	Oratex Silver 2m
1 x	Oracover White 2 m
2 x	Ply-Span 450x600/13g White
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	One touch canopy lock
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Canopy Latch
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Screw-lock connector M2 (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	Cockpit plastic closing
1 x
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Universal Colour Paste deep black 250 g
1 x	Partall paste 650 g
2 x	Hobbylite Filler, Balsa colour
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Painting GHT Lexan Black 150 ml
1 x	20 g tin paste
2 x	500 ml sealer (DOPE)
3 x	Solvent Plasti Dip 1000 ml
1 x	Paint gun for sprays
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Short ball link M3 (6 uds)
1 x	CC 01
1 x	CC 02
1 x	"M" set
1 x	Yellow smoke canister 100 g
1 x	1/10 Pilot "Jack"
1 x	Extension silicon 10 cm (Graupner)
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Jet Afterburner Simulator NF-Jet3 RY
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	NF-3m Heli Kit
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	LED wire (green - 2pcs)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
2 x	2,4x1000 mm 2:1 black termoretract tube
2 x	12.7 mm 2:1 black termoretract tube
2 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Monokote PLATINO metalizado (1.8x0.65m)
2 x	1,6x1000 mm 2:1 red termoretract tube
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	Oracover CHROME 2m
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
2 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	120x60 mm SLH KOVO wheel
2 x	SIG Coverall 1.2x0.9 m
1 x	Oracover Yellow CADMIO 2 m
1 x	SIG Coverall 1.2x1.8 m
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	ORACOVER transparent Yellow (10 m)
2 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Ply-Span 450x600/13g Black
2 x	6,4x1000 mm 2:1 red termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	SIG Coverall 1.2x4.5 m
1 x	Solarfilm Lite blue transp. 5m
1 x	Oracover Black 10 m
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Yellow CUB 10 m
1 x	ORACOVER Ferrari red (2 m)
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	Oracover Azul 2 m
1 x	Snap long M2 (10 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Snap for floding prop for 2 mm axi
2 x	Split pin 1.6x16 mm (10 uds)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Split pin 1x8 mm (10 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	250 mm / 16 mm Airbrakes
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	PowerBox PIONEER incl. microSwitch
1 x
1 x	PowerBox MagSensor red connector
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	PowerBox 12
1 x	External LED's (2 pcs)
1 x	PowerBox MERCURY SR2
1 x	DPS Switch JR/JR
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	PowerBox iGyro SRS
1 x	Mobile Terminal
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Combo lighting module with covering drop shape
1 x	3 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	14 mm Portholes for screws (10 pcs)
1 x	Adaptador equilibrador HITEC (XH)
1 x	NF-3 RC set
1 x	PowerBox Champion SRS
1 x	PowerBox iGyro SAT

5,352.29EUR