Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 2,5x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 4,0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
3 x	Carbon fiber rod 6.0 mmx1000 mm
3 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
3 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
3 x	Carbon fiber rod 0.5 mmx1000 mm
4 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Tape GFK 25 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x200 mm battery rings
1 x	DPSI Ampere battery backer
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Three-function control switch by FUTABA
1 x	Electric rocket starters (6 pcs)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Receptor FUTABA R7006SB FASSTest/FASST
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Wingstabi 9 DR M-Link Receiver
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Blind nut M4 (4 pcs)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	Round Rod 1,0x1000 mm
1 x	Futaba BLS152 - Upper Case
1 x	Set stickers JEEMO "Andy"
1 x	Gear set HITEC HS-56 HB
3 x	Carbon fiber rod 5.0 mmx1000 mm
3 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
4 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	DUPLEX 2.4EX RC Power Switch 10
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	DUPLEX 2.4EX MUI 75
1 x	DUPLEX 2.4 EX MVario2
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	DUPLEX 2.4GHz GPS
2 x	Pine wood slat 3.0x10.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Micro Crystal RX 35.120 Ch 72
1 x	Crystal TX 35.050 Ch 65
1 x	DUPLEX TGs 2,4 GHz (transmitter module)
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	DUPLEX USB Adapter
1 x	BALSA trip 4.0x4.0x1000 mm
3 x	BALSA trip 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	DUPLEX 2,4GHz MRPM EX
1 x	DUPLEX 2.4 EX MBar
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Crystal RX 35.120 Ch 72
2 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal Universal RX 35.150 Ch 75
2 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Crystal Universal RX 35.050 Ch 65
1 x	Aero-Master Wings (Aero-naut)
1 x	X-RAY Micro QR (Elevator)
1 x	TAKEO 3.6m electric
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Gear carbonite set HITEC HS-6965
1 x	13 mm wing servo holder
1 x	Servo DITEX EL0510M
2 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	Gear set HITEC HS205/225MG/5245MG/7245MH
1 x	11 mm wing servo holder
1 x	Fuselage Bags JEEMO
1 x	Servo HITEC HS-225 MG
1 x	Servo HITEC D954 TW
1 x	Servo inverter
1 x	Servo HITEC D645 MW
1 x	Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x	Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3.
1 x	Wheel 18 mm
1 x	ULTIMATUM 2.0 m green/black
1 x	ULTIMATUM 2.0 m yellow/blue
1 x	Wheel FEMA 152 mm / 8 mm
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Wheel FEMA 112 mm / 6 mm
1 x	Wheel 28 mm
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Wheel FEMA 178 mm / 8 mm
1 x	Wheel FEMA 140 mm / 6 mm
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Nose wheel 62 mm
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Wheel Ø 90 mm (1 ud) Electron Retracts
1 x	Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m
1 x	76x23 Ø3.5 mm aluminium core wheel
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Servo SAVOX SV-0236 MG HV
1 x	Servoarm SH-81, two sides, aluminium
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	A60-6XS V4 28-Pole
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
2 x	BALSA leading edge 8x10x1000 mm
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	KIRA 500-30 6,7:1
1 x	Adapter FUN 400/480
1 x	Esc KOSMIK 160+ HV COOL
1 x	90x75 mm standart servo cover
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	Servo KST BLS905X HV V2.0 8Kg 20mm
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Support Filtro FESTO
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support pump Xicoy X45
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support FUEL DOT V3
1 x	Recessed MPX connector support (6 pcs)
1 x	Angle support XT60 conector
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support ECU Xicoy X-45
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Servo SAVOX SV-1261 MG
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Turbo light spinner cap white 32mm
1 x	Beech dowels 10 mm x 1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
2 x	BALSA trip 2.0x10.0x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Servo SAVOX SV-1273 TG
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	KIRA 480-38 5,2:1
1 x	JIVE 120+HV Esc
1 x	Fuel Dot (RED)
1 x	EWC3 40 cm wing connector
1 x	Filter Capacitor JR
1 x	DPSI RV Mini 5 (2008)

16,193.46EUR