Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]


DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Regulador Hobbywing Platinum 260A HV SBEC V5
Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x Universal Colour Paste deep black 250 g
2 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Hobbylite Filler, Balsa colour
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Painting GHT Lexan Black 150 ml
1 x Spray EC Red 400ml
1 x Solvent Plasti Dip 1000 ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Nitroverdu 500 ml
1 x Spannlack 1000 ml
1 x 20 g tin paste
2 x Spray adhesive AEROFIX 2
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Plasti Dip Liquid Tape 429 ml black
1 x 500 ml sealer (DOPE)
1 x Spray Graphit 33
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
2 x Dean "T" - Futaba Adapter
1 x Dremel PERMAGRIT thin lime
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Cut tube
1 x CC 03
1 x Circlick securite
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Cabling for Fox MDM1 wings
1 x Copier 5x20 cm pcs
2 x Digital scale up to 40 kg
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Blind nut M2 (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Crimping tool
1 x 55% silver electrodes (2 pcs)
1 x 30 cm BEC cable (female)
1 x CC 05
1 x Ball Link Plier
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Fresa corte diamante Ø 1.0mm (bola)
2 x Digital weight, angle and balance meter BASIC
1 x Connector Sub-D 2+5 Female
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x 12 mm floating pad (49 pcs)
1 x 15 mm floating pad (30 pcs)
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x DPSI Ampere battery backer
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 
1 x Dust collector for mould cleaning
1 x Aluminium wide washer M3 red (4 pcs)
1 x 25 mm Sandpaper file
1 x Connector CAN 15
1 x Copier 2x20 cm pcs
1 x Blind nut M5 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Double conector with JR adapter and 200 mm extension
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Ball Link Plier
1 x 2,5x60 mm allen screwdriver
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x EC-Cutter
1 x 1,5x50 mm allen screwdriver
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x 4 LiPo XH>EH adapter
1 x Connector Sub-D 2+5 Male
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Blind nut M3 (4 pcs)
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x 100g Flux Paste for Silver Solder
1 x CC 02
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Aluminium wide washer M3 blue (4 pcs)
3 x Gates hinge aluminium (1 pcs)
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
3 x Nylon hinge 15x0,3 (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pin hinge 39x20 mm (10 uds)
1 x Jeti Black cap
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Miniature brass strap hinge, 1 m
2 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x Long pinned hinge (12 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x Bungee HLG Premium
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x ABS 500 x 400 x 1 mm (white)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Buy Perforated film 100 cm / 50 m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Buy Perforated film 100 cm / 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Buy Perforated film 145 cm / 50 m
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x BALSA leading edge 8x10x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x 1/6 Pilot "John"
1 x Towing hook <3m
1 x SERVO HOLDER
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x AXI 2204 Multicopter
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x MPX 8 pins plug mold
1 x Sub-D Plug Mold
1 x Extension 5 lipos JST - JST/C
1 x Interruptor RX/Batterie
1 x PSC 6
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x 5 LiPo XH>EH adapter
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Servo M2x7/16 screw (4 pcs)
1 x Welder 100W/200V
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Quicklock washer 2 mm (10 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Small flex hinge (12 uds)
1 x Adapter 4,0 mm M6
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x 2 mm Prop Adapter M5
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Adapter 5,0 mm M8
1 x Adapter 3,2 mm M8
1 x 2,3 mm Prop Drive Günther M4
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Locking cable tie 2.5x100 (uds)
1 x Threaded coupler M2 (10 uds)
2 x Micro flex hinge (12 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Digital precision scale up to 2000 g
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Pin hinge 26x11 mm (10 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Large flex hinge (12 uds)
1 x Lunak ARF 2000 mm Yellow (Hacker Model)
1 x Gates hinge
1 x BABY glider drawings (Aero-naut)
1 x 1000 ml sealer (DOPE)
1 x Glider PIROL
1 x Set stickers JEEMO "Andy"
1 x 3 mm Leader (L 100 mm)
1 x 28 mm turnbuckle
1 x X-RAY Micro QR
1 x X-RAY Micro QR (Fuselage with canopy)
1 x BABY glider (Aero-naut)
1 x 3,2 mm Prop Adapter M8
1 x Glidder Mü13e (Bergfalke)
1 x Dremel 3000 130W
1 x 15x7 tree blades propeller
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x X-RAY Micro QR (Elevator)
1 x Dremel PERMAGRIT 18 mm round lime
1 x Canopy Sweet / Siesta
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 mm Prop Adapter M6
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x 14 mm portholes (10 pcs)
1 x Adapter lead MPX/XT60
1 x VTX 477 Carbon Rotorblade
2 x Aluminium cap bolt washer M3 black (8 pcs)
1 x 3,2 mm Prop Adapter M6
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
2 x DPSI Micro - RCS
1 x Vasa model Catapult
2 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Propeller diller for DLE170
1 x Sealing Iron STANDARD
1 x Propeller diller for DLE111 and DA85-150
2 x DPS Switch JR/JR
1 x Emcotec SPS Magnetic Switch Actuator
1 x OPTOTRONIX Aurora LCU
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon plate 700x550x0.5 mm
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Glass fabric 49 g/m² (1,27 x 20 m)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon plate 550x350x1.0 mm ECOTECH
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x ABS 500 x 400 x 1,5 mm (white)
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Heat sink for Optotronix LEDs
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x DPSI RV Mini 5 (2008)
1 x EWC3 40 cm wing connector
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x MPX Sub-D Adaptor
1 x Cover cap drop-shaped paintable 43 mm
1 x Optotronix Aurora Plug
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x EWC3 100 cm wing connector
1 x DPSI 2001 RV
1 x PowerFuel RX V2 Fuel Pump
1 x DPSI RV Mini 5 Magic
1 x DPSI RV Mini 6 (2008)
13,092.10EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to DPSI Ampere & Voltage bundle
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce