20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Pan Head Screw M2x8 PH countersunk head temporarily out of stock	Nut for mounting M2 (4 pcs) temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Quick Find

Shopping Cart

1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
3 x	Softshell Hispano Aviación
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PIX Hawk with accesories
1 x	USB Mini Camera endoscope
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Round Rod 2,0x1000 mm
1 x	Premium servo extension 25cm
1 x	Threaded coupler M2 (10 uds)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Smoke set "Glider"
1 x	Remote electric ignition system
1 x	Parachute expulsion foam
1 x	PPM Encoder Module
3 x	Combo lighting module with covering drop shape
2 x	Resistor 3W 5% 2R2
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Plastic wheels 36 mm (2 pcs)
1 x	Horn mando small (2 pcs)
2 x	Wheel cover holder Ø 5 mm (2 uds)
2 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Spring lock washer 4.1 mm (20 pcs)
2 x	Spring lock washer 2.6 mm (20 pcs)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
3 x	Flat washer 3.2 mm (20 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
2 x	Quicklock washer 1 mm (10 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Wheel cover holder Ø 4 mm (2 uds)
2 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Plastic wheels 28 mm (2 pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	4 mm Prop Adapter M6
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	5 mm Prop Adapter M8
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	5 mm Prop Adapter M6
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Pan Head Screw M2x6 PH
2 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	3,2 mm Prop Adapter M5
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Screw M2x6 (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Plastic wheels 30 mm (2 pcs)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Green smoke canister 100 g
1 x	White smoke canister 100 g
2 x	BALSA trip 10x10x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	Axle for motor A30-XL V2
1 x	Turbo light spinner cap white 32mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Screwdriver for Torx® TX6
1 x	JETImodel Addcap 820
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Propadapter for motor A60-V2
1 x	FesEx-Uni6 System
1 x	Screwdriver for Torx® TX8
1 x	A50 Motor Mount Alu complete set
1 x	EDF Stream-Fan 110mm kv780
2 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
2 x	Fuel Dot (Silver)
2 x	LED blink wire flashing (orange - 2pcs)
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
2 x	Servo-V-Limiter 5.2V
2 x	DPSI magnetic switch actuator (PCB)
2 x	Fuel Dot (Black)
2 x	Esc X-40-SB-Pro
2 x	Esc master MEZON 120 Lite
2 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
2 x	DPSI RV Mini 6 (2008)
1 x	LED blink wire flashing (green - 2pcs)
1 x	LED wire (rojo - 2pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	2,3 mm Prop Adapter M5
1 x	Brass control horn M4 short for wire (10pcs)
1 x	3 mm Short Prop Adapter M5
1 x	Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Resistor 3W 5% OR47
1 x	Landing lights 18 mm (0.71in)
2 x	Heat sink for Optotronix LEDs
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Esc X-70-OPTO-Pro
2 x	DPSI Micro - RCS RV
1 x	Esc MasterSPIN 99 Pro OPTO
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	LED wire (orange - 2pcs)
1 x	Esc MasterSPIN 70 Pro OPTO
1 x	Esc X-75-OPTO-Pro
2 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI Ampere battery backer
1 x	DPSI magnetic switch actuator (housing)
1 x	ESC MEZON 115 Opto
1 x	Filter Capacitor JR
1 x	Optotronix X-Carrier
1 x	DPSI 2001 RV
2 x	DPSI Micro MPS
1 x	OPTOTRONIX Aurora LCU
1 x	DPSI LR-S (with push buttons)
1 x	Esc MasterSPIN 16 Pro
1 x	Esc MasterSPIN 80 Pro
1 x	EWC3 40 cm wing connector
2 x	DPSI Ampere & Voltage bundle
1 x	DPS Switch JR/JR
1 x	Pan head screw M2x16 PH
1 x	Nut for mounting M3 (4 pcs)
1 x	DYMOND VTX UBS Programming adapter
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	6 mm Prop Adapter M8
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	DPSI RV Mini 6 Magic
1 x	EWC3 100 cm wing connector
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Esc MasterBasic 55SB
2 x	DPSI V-Match
1 x	DPSI Micro - RCS
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	EWC6 40 cm wing connector
1 x	Esc MasterSPIN 100 Pro
1 x	Esc MasterBasic 70SB

8,813.83EUR