18.00EUR

EWC3 100 cm wing connector
[EMCA85082]

EWC3 100 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	800TVL CMOS camera for FPV
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	USB Mini Camera endoscope
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Gates hinge
1 x	Gates hinge aluminium (1 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	18 mm reinforced hinge
1 x	Long pinned hinge (6 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	25 mm reinforced hinge
3 x	Xplorer4 anemometro
2 x	Xplorer3 anemometro
2 x	Xplorer2 anemometro
1 x	Cut tube
1 x
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Screwdriver for Hexagon 1,27mm
2 x	Crimping tool
1 x	Vacuum pump P1-N
2 x	Digital precision scale up to 2000 g
2 x	Ball Link Plier
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX6
3 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Starter Sullivan-STAR 603 DINATRON
2 x	Digital scale up to 40 kg
2 x	Yellow smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Horn with ball 55x40
1 x	Cable control set
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Horn with ball 40x30
1 x	ORACOVER Ferrari red (2 m)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Indoor hinge with servo arm integraded
1 x	Xplorer1 anemometro
1 x	Propeller POWER-PROP 7x7
1 x	Ventus 1:4 set of instruments
1 x	Pistola termica MH 550 micro
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Sub-D Plug Mold
1 x	Red smoke canister 65 g
1 x	"M" set
1 x	Copier 2x20 cm pcs
1 x	Z Bender - S Type Tool
1 x	3,0x60 mm allen screwdriver
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Baal link 4/14/4 (5 pcs)
1 x	Starter EM Gear Power 250
1 x	Tool for entel
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	100g Flux Paste for Silver Solder
1 x	Hot Glue Stick RED
2 x	Hot Glue Stick GREEN
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Sealing Iron Sleeve STD
1 x	1,5x50 mm allen screwdriver
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Oracover Black 10 m
1 x	Oracover Black 2 m
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oracover Azul Cielo 2 m
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	Initior Transmitter FTX2 Wireless
1 x	Green smoke canister 100 g
1 x	White smoke canister 140 g
1 x	"S" set for planes
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Red smoke canister 100 g
1 x	White smoke canister 65 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Smoke set "S"
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Sealing Iron Profi LCD
1 x	Precision wrench L100 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Concave-Convex sandpaper file 13 mm
1 x	LA500 freewheel bearing
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	LA500 front gear holder
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Dust collector for mould cleaning
1 x	Hot Glue Stick BLACK
1 x	Heat Seal Iron
1 x	Flap hinge (6 pcs)
1 x	OPTOTRONIX Aurora LCU
1 x	DPSI OCP Overload protection

4,020.84EUR