69.95EUR

DPSI Micro SingleBat 5.9V/7.2V magnetic switch
[EMCA11063]

DPSI Micro SingleBat 5.9V/7.2V magnetic switch

Product description and features
Compact LiPo regulator with magnet switch transmitter and selectable output voltage. Suitable for 5/6cell NiCad/NiMH as well as LiIon/LiPo and LiFePo4 batteries. Regulated and stabilized output voltage 5.9 volts or 7.2 volts adjustable.
Electronically On/Off-switch for complete contact less switching operation with an external magnet from outside.
The used battery type and the low voltage detection can be programmed. Intelligent voltage monitoring with optical error indication.
Designed for 5 up to a max. of 10 servos. Supports 4A continuous current and 25A peak current. For small engine models up to approx. 2 meters wingspan, glider planes up to approx. 3 meters wing span, impeller jets or helicopters.

Connectors
Battery connector cable JR socket with flexible silicone strand 0.5 mm²/AWG21 cross section.
Dual JR/Uni connectors with high grade silicone strand 0.5 mm²/AWG21 cross section on output side.
All connectors are gold plated (FCI contacts).

Delivery contents
1 Magnetic switch DPSI Micro SingleBat, 1 switching magnet with EMCOTEC label, 1 vibration insulator, 2 washers, 2 screws, 1 drilling template and 1 quick reference guide.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Beech dowels 3.0 x 1000 mm
2 x	LUCAS pilot ARTF
2 x	Rescue 1,8m2 / BackPack
2 x	MAX pilot ARTF
2 x	Paramotor BackPack XXS 2
1 x	Aramid 50 daN 50 m
3 x	Para-RC Mix
3 x	Parachute P4
1 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Parachute PV6 for F3J
1 x	Parachute BACKUP X100
1 x	Trike XL motor set (motor+esc+prop)
1 x	Ring 320 mm length (5 pcs)
1 x	Marker ties (20 pcs)
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	BALSA triangular 6x6x1000 mm
1 x	Tape GFK 38 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cinta Goldfix 1m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Spikes Band (5 m)
1 x	SE Ring 300 mm (2 pcs)
1 x
1 x	20x1000 mm Ring Strap Back To Back
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 350 mm (2 pcs)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	USB HLS prog. interface
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	Opale Rucksack
2 x	Paramotor BackPack XXS (without accessories)
1 x	White 2,4 GHz antenna exit guides (2 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
2 x	Windsock Ozone L - 700 mm
1 x	Extinguisher CO2 - 2 Kg
2 x	Blades 330mm
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x	Cable video GoPro
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	PPM Encoder Module
1 x	TX 250 mW especial GOPRO
1 x	Servo MKS HV1220
1 x	Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x	Wing OXY 5,0 m2
1 x	Ballast 700gr OPALE
1 x	TX Tray V1 Hand Rests only
1 x	Windsock Ozone L -1200 mm
1 x	Adapter 3,0 mm M8
1 x	2,3 mm Prop Drive Günther M4
1 x	Para-RC Trike "RC-Bullix"
1 x	Wing OXY 0,5 pulgadas2
1 x	5 mm Prop Adapter M6
1 x	Adaptadores carga 6s JST-XH
1 x	Emisora JETI Duplex DS-16 II Carbon Line RED
1 x	JETI handheld transmitter DS-14 II Red Multimode
1 x	Emisora JETI Duplex DS-16 II SILVER Multimode
1 x	KIRA 600-16
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	KIRA 500-30 6,7:1
1 x	KIRA FAI 5F5/4s
1 x	Tail support (2 pcs)
1 x	Blade holder lower
1 x	Blade holder center GFK 0,5 mm
1 x	Rotorshape Elevator
1 x	Head lower part New
1 x	Blade holder center
1 x	Blade holder upper
1 x	Wheel keeper washer
1 x	Steering lever
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	DPSI RV Mini 5 (2008)
1 x	Adapter 4,0 mm M8
1 x	Transmitter JETI Duplex DS-12 EX Multimod BLUE
1 x	Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2
1 x	JETI transmitter DC-14 II Green Multimode
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod
1 x	JETI transmitter DC-14 II Blue Multimode
1 x	Transmitter JETI Duplex DS-12 SE Carbon RED
1 x	JETI handheld transmitter DS-14 II Green Multimode
1 x	KIRA 480-31 5,2:1
1 x	Medidor ángulos y/o incidencias
1 x	KIRA 600-38 6,7:1
1 x	PYRO 700-45
1 x	Charger 220/110v
1 x	Antenna Hole Cap V1 (Silver)
1 x	KIRA 500-36 6,7:1
1 x	PYRO 800-40 Long Axi
1 x	KIRA 480-34 5,2:1
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Reflector 18 mm (2 pcs)
1 x	Screws flush mount M2
1 x	Balls 4 mm
1 x	Head lower part
1 x	Head spacer
1 x	Rotorhead pushrod
1 x	Battery plate
1 x	Head upper part
1 x	Nut M2
1 x	Screws M1,6x6 Allen
1 x	Rudder
1 x	Tail boom
1 x	Head runner
1 x	Head core bushing
1 x	Bearing housing
1 x	Washer 2.2×4
1 x	Motor wall
1 x	Head core
1 x	Baering 3x8x4

26,404.50EUR