69.95EUR

DPSI Micro SingleBat 5.9V/7.2V magnetic switch
[EMCA11063]


DPSI Micro SingleBat 5.9V/7.2V magnetic switch

Product description and features
Compact LiPo regulator with magnet switch transmitter and selectable output voltage. Suitable for 5/6cell NiCad/NiMH as well as LiIon/LiPo and LiFePo4 batteries. Regulated and stabilized output voltage 5.9 volts or 7.2 volts adjustable.
Electronically On/Off-switch for complete contact less switching operation with an external magnet from outside.
The used battery type and the low voltage detection can be programmed. Intelligent voltage monitoring with optical error indication.
Designed for 5 up to a max. of 10 servos. Supports 4A continuous current and 25A peak current. For small engine models up to approx. 2 meters wingspan, glider planes up to approx. 3 meters wing span, impeller jets or helicopters.

Connectors
Battery connector cable JR socket with flexible silicone strand 0.5 mm²/AWG21 cross section.
Dual JR/Uni connectors with high grade silicone strand 0.5 mm²/AWG21 cross section on output side.
All connectors are gold plated (FCI contacts).

Delivery contents
1 Magnetic switch DPSI Micro SingleBat, 1 switching magnet with EMCOTEC label, 1 vibration insulator, 2 washers, 2 screws, 1 drilling template and 1 quick reference guide.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 4 LiPo XH>EH adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Connector CAN 15
1 x CM-3
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Double conector with JR adapter and 200 mm extension
1 x Cabling for Fox MDM1 wings
1 x CC 01
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Connector Sub-D 2+5 Female
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 30 cm BEC cable (female)
1 x CC 02
1 x 30 cm BEC cable (male)
1 x CC 03
1 x CC 05
1 x BEC 3A FOXY
3 x Beech dowels 4.0 x 1000 mm
2 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
3 x Beech dowels 2.0 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
2 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 10x10x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Motor A2212/13T
1 x Cabel "Y" 15 cm
1 x Short Switch On/Off micro
1 x Spannlack 1000 ml
1 x 
1 x Cabel charger transmitter GRAUPNER
1 x 1/12 Pilot "Langley"
1 x SPS 70V 100/200 A
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x DPSI RV Mini 6 Magic
2 x DPSI Ampere & Voltage bundle
1 x DPSI LR-S (with push buttons)
1 x Suncover 100cc Red
1 x DPSI Ampere battery backer
2 x DPSI Micro MPS
1 x BALSA triangular 10x10x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Aluminun wheel collar 3 mm Ø (4 uds)
2 x Servo-V-Limiter 5.2V
2 x Emcotec SPS Magnetic Switch Actuator
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x DPSI Micro - RCS RV
1 x Festo 6mm Tubing Holder (10 uds)
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Birch plywood plate 600x300x2.5 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller 3x2
1 x Festo Adaptor Tygon Large/4mm
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Body for landing gear Ø 3 mm
1 x Trailing leg 131 mm
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Air pressure gauge
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Nylon threaded block M5 (2 uds)
1 x Check valve quick hose connector 4-4 mm
1 x Foam plastic plates (310x210x5 mm)
1 x Tail wheel for 5-8 kg models
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x 3-blades 27x12 carbon prop Super Silence
1 x Propeller KAVAN 32x12 2-Bl
1 x 3-blades 29x12 carbon prop Super Silence
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x Hose clamps 0.16-0.20in, (4 pieces)
1 x DPSI magnetic switch actuator (housing)
1 x DPSI RV Mini 5 Magic
1 x Soldering PCBs 8pin, 5 pieces
1 x DPS Switch JR/JR
1 x Spinner 42 mm EXTRA 330SC
1 x Propeller G-Sonic 20x8
1 x 3-blades 21x12carbon prop Super Silence
1 x 24x10 prop Super Silence
1 x 27x10 prop Super Silence
1 x 3-blades 28x12 carbon prop Super Silence
1 x 28x12 prop Super Silence
1 x 24x14 prop Super Silence
1 x 
1 x 3-blades 16x10 carbon prop Super Silence
1 x 3-blades 30x12 carbon prop Super Silence
1 x 22x10 prop Super Silence
1 x 24x12 prop Super Silence
1 x 3-blades 20x10 carbon prop Super Silence
4,179.57EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies