119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Stickers-digit for marking
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Ferrita con funda
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Ferrita 17x10x6.5 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x L-Connector 1.0 mm x 1000 mm
2 x Extractor piñones 2.3/3.2 mm
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Oracover White 10 m
1 x Ply-Span 450x600/13g Orange
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Silicone red 0,25 mm² wire (25 m)
1 x Pine wood slat 10x10x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Wing OXY 5,0 m2
2 x 25 mm carbon servo arm
1 x Servo GO-1053 MG 20.0kg
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
2 x Metal gear set for HS85MG/5085MG
2 x Aluminium servo arm (2 uds)
1 x 4 mm Prop Adapter M6
2 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Servo GO-1013 MG 3.8kg
2 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Gear carbonite set HITEC HS-6965
1 x Gear set HITEC HS-311/322/325BB
1 x Servo HITEC HS-311
1 x Screws set for Hitec MG arms servo
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Servo HITEC D85 MG
1 x Servo BMS-4112
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x MIG 29 3D RTF, Servo
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Stratus
1 x Glases Nimbus "Black"
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo GO-09 9g
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Slave-cable USB Easy Sim
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x USB Mini Camera endoscope
1 x Servos security connector (2 pcs)
1 x Fast attachment for servos (25 pcs)
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Glases Nimbus
1 x Glases Aspen
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Servos wing assembly set HS 80/81/82/85
1 x Metal gear set for HS81MG/5082MG
1 x Glases Innovation Plus
1 x Servo Dymond D 37 Eco
1 x Servo BLUE Bird BLS-H71B v2
1 x Cover cap drop-shaped paintable 43 mm
1 x DPS Switch JR/JR
1 x F8F Bearcat #68 2.460 mm
1 x FW-190 2400mm
Electric Landing gear complet (CY model),
1 x Fokker D-VIII 2090 mm R/W (CY model)
1 x Cessna 310 Red/Gold 3200 mm (CY MODEL)
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Motor OS 3820-1200 electric
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
7,089.10EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies