Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	M2,5 5Diam metal ball link V3 (2 pcs)
2 x	Joint with bearing M2,5 22x5,5
1 x	Ball link M3 (6 uds)
1 x	M2 5Diam black ball link V2 (2 pcs)
2 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Long ball link M3 (6 uds)
1 x	Long ball link M1.6 (6 uds)
1 x	Joint with bearing M2 22x5,5
2 x	M3 INDUSTRIAL ball link (2 uds)
2 x	6 mm ball link M3 (10 pcs)
2 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Ball link M2 (10 pcs)
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Ball link M3 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Joint with bearing M3 22x5,5
1 x	Miniature brass strap hinge, 1 m
1 x	18 mm reinforced hinge
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Horn for flap control (1 pcs)
1 x	Horn with ball 55x40
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Long pinned hinge (12 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Small pinned hinge (12 uds)
1 x	Horn 5/20 with M2 Bearing
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn with ball 40x30
1 x	15 mm reinforced hinge
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Gates hinge
2 x	Horn 5/15 with M2 Bearing
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Small aluminium horn red (2pcs)
1 x	6 mm red aluminium threaded horn with patella
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	RH long aluminium horn (2pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	LH long aluminium horn L31xH30 (2pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	25 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	20 mm carbon horn
1 x	Flap hinge (6 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Horn 16,5x20 mm (2 pcs)
3 x	Extinguisher CO2 - 2 Kg
1 x	Release wax 250ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Spray EC Red 400ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	M3 black washers (4 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
2 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Micro control horn T2 Ø 1
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	110x55 mm SLH KOVO wheel
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Long horn 50x26
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Short adjustable control horn 3x24
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Transmitter Balancer Futaba V
1 x	Neck strap Double V2
1 x	120x60 mm SLH KOVO wheel
1 x	Switch Cap L (silver)
1 x	Battery FUTABA 18MZ
1 x	Futaba Aero Large Case - Internal Foam
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Switch Cap M (blue)
1 x	Switch Cap M (silver)
2 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Decorative caps, multicoloured, short
1 x	Maleta transporte FUTABA 10PX
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Adap/Exten for Futaba 12-14C
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Tray for FUTABA 18 SZ
1 x	Switch Cap L (Blue)
1 x	Propeller POWER-PROP 7x7
1 x	Socket head ball link M3 (2 uds)
1 x	Oracover Green10 m
1 x	Ply-Span 450x600/13g Blue
1 x	ORACOVER Ferrari red (2 m)
1 x	Oratex Antik 2m
1 x	Ply-Span 450x600/13g Orange
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Orange 2 m
1 x	Socket Head Screw M2x5
1 x	Socket Head Screw M2x10
1 x	Socket Head Screw M2x8
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
2 x	Hexagonal Nut M4 (10 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Carbon plate 550x350x1.0 mm ECOTECH
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Carbon plate 350x150x0.5 mm
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Carbon plate 350x150x3.0 mm
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Charger ISDT 608AC 200W
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	Charger SKY RC D200 neo
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Cockpit aluminium closing
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Carburator Moki S400
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Carbon plate 350x150x4.0 mm
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Carbon plate 350x150x2.0 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Gasket set DLE-30
1 x	Spinner 82mm Black ventilado
1 x	Gasket set DLE-20
1 x	CILINDER FOR DLE 55RA
1 x	KAVAN Threadlocker - Blue 10ml
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	DPSI RV Mini 6 (2008)
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Cable video GoPro
1 x	Cable video GoPro and 5V cable
1 x	Gasket set DLE-55RA
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	DLE 111 Old Crankshaft keyway
1 x	Gasket set DLE-120
1 x	57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Antenna Hole Cap V1 (Silver)
1 x	Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs)
1 x	Transmitter Stick Ends V1 Silver - M3 (2 pcs)
1 x	TX-Tray V1 (L) (Red)
1 x	Futaba S-Bus Rx/Gyro Link Lead

4,265.57EUR